Abstract:Oxide dispersion strengthened FeCrAl alloys dispersed high-density nano-oxides in the matrix show outstanding corrosion resistance and mechanical properties. However, ODS FeCrAl alloys achieve the high strength generally at the expense of ductility in some way. Here, a method by introducing a bimodal grain structure was designed to overcome the strength-ductility tradeoff. In this work, ODS FeCrAl alloys were successfully fabricated through various mechanical alloying time, combined with spark plasma sintering under the vacuum of less than 4Pa. Microstructural characterization showed that the average grains size and nano-oxides size decrease gradually, and the density of nano-oxides increases, as the milling time increases. Mechanical properties revealed that both the strength and ductility were significantly synergistic enhanced with increasing milling time. The bimodal grain distribution characterized by electron backscatter diffraction (EBSD) (vacuum degree was less than 5E-5pa) was beneficial for the activation of the back stress strengthening and the annihilation of these microcracks, thus achieving the excellent ductility (27.65%). In addition, transmission electron microscope (TEM) characterization under the vacuum degree of less than 10-6pa illustrated that ultra-high-density nano-oxides (9.61E22/m3) was crucial for enhancing the strength of ODS FeCrAl alloys (993MPa). The strengthening mechanism superposition, based on the model of nano-oxides interrelated with the dislocation, illustrated an excellent agreement with experimental results from yield strength strengthening mechanisms. To our best knowledge, H40 (milled for 40h, and sintered at 1100C) alloy presents the outstanding strength with the exceptional ductility among all studied ODS FeCrAl alloys, which makes it the promising cladding materials for the accident tolerant fuel cladding.

Laser-based powder bed fusion of pre-alloyed oxide dispersion strengthened steel containing yttrium

High-temperature Oxidation Behavior of AlCoCrCuFeNi High-Entropy Alloy by Selective Laser Melting

Characterization of oxide dispersion strengthened ferritic steel fabricated by electron beam selective melting

In-situ synthesis of Yttria-based precipitates and their effects on Fe12Cr6Al in laser powder bed fusion

Microstructure and properties of oxide-reinforced FeCrAl matrix alloy manufactured by selective laser melting

Processing-microstructure relationships in ferrous alloys via mixed powder laser powder bed fusion

In Situ Reactive Formation of Mixed Oxides in Additively Manufactured Cobalt Alloy

Enhancement of FeCrAl-ODS steels through optimised SPS parameters and addition of novel nano-oxide formers

Microstructure and mechanical properties of multi-component nano oxide-dispersion strengthened RAFM steel fabricated via laser powder bed fusion

Nanoparticle Tracing during Laser Powder Bed Fusion of Oxide Dispersion Strengthened Steels

Microstructure and tensile properties of Zr-containing ODS-FeCrAl alloy fabricated by laser additive manufacturing

Laser powder bed fusion of a tungsten-nickel-ferrum alloy via in-situ alloying: Densification, microstructure, and mechanical properties

Enhanced strength-ductility combination by introducing bimodal grains structures in high-density oxide dispersion strengthened FeCrAl alloys fabricated by spark plasma sintering technology

Achieving ultrahigh strength in oxide-dispersion-strengthened CoCrNi alloy via in situ formation of coherent Y-Ti-O nanoprecipitates

Development of a high strength Zr/Sc/Hf-modified Al-Mn-Mg alloy using Laser Powder Bed Fusion: Design of a heterogeneous microstructure incorporating synergistic multiple strengthening mechanisms

Laser metal deposited steel alloys with uniform microstructures and improved properties prepared by addition of small amounts of dispersed Y2O3 nanoparticles

Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion

Laser-beam powder bed fusion of Al–Fe–Cu alloy to achieve high strength and thermal conductivity

Nanocrystalline Ti‐Al‐Mo‐Zr‐Si alloy (TC11) by laser powder bed fusion in‐situ alloying

Laser powder bed fusion of nano-titania modified 2219 aluminium alloy with superior mechanical properties at both room and elevated temperatures: The significant impact of solute

Development of an Oxide Dispersion Strengthened Austenitic Steel Powder with 4% Aluminum Addition