Laser metal deposited steel alloys with uniform microstructures and improved properties prepared by addition of small amounts of dispersed Y2O3 nanoparticles
Xiao-yu Liu,Yi Sui,Jin-bao Li,Yi-ming Li,Xiao-hua Sun,Chang-sheng Liu
DOI: https://doi.org/10.1016/j.msea.2021.140827
2021-03-01
Abstract:<p>Steel is the most common engineering material used in additive manufacturing. In this work, 100-layers wall structures of 17Cr2NiSi steel alloys were successfully fabricated by laser metal deposition (LMD) in the presence of small dispersed amounts of Y<sub>2</sub>O<sub>3</sub> nanoparticles without additional heat treatment. The effects of added amounts of Y<sub>2</sub>O<sub>3</sub> nanoparticles on the microstructure, formability, microhardness, and tensile properties were all investigated. The results indicated a decline in many features, including formation of columnar and dendrite solidification structures, elongated grains in the build direction, pronounced crystallographic textures, and interlayer heat-affected zone. The reason for this was associated with the dissociation effect of Y<sup>3+</sup> ions on dendrites by decreasing the melting point of the material, combined with the low-energy heterogeneous nucleation effect of Y elements on the grains through segregation into Si-Y-O particles. Meanwhile, minor amounts of Y element (<10 ppm)promoted the distribution and dispersion of Si particles in the modified materials, while the majority of Y element inhibited the formation of chromium oxide phase to generate Y<sub>2</sub>O<sub>3</sub> as slagging. This led to lower remnant porosity and uniformly modified wall microstructures. The presence of nano-Y<sub>2</sub>O<sub>3</sub> improved the 3D printing properties of LMD stainless steel in terms of preferable formability (16.4 % up), uniform micro-hardness, and uniform tensile properties. In sum, these findings look promising for future fabrication of alloy steel by LMD method.</p>
materials science, multidisciplinary,nanoscience & nanotechnology,metallurgy & metallurgical engineering