Abstract:In this study, a new heat‐treatment process is proposed to optimize the volume fraction and stability of retained austenite (RA) in multi‐alloyed steel. The resulting excellent mechanical properties are due to the enhanced transformation‐induced plasticity (TRIP) effect and increased work‐hardening rate. The stability of RA also provides sustainable TRIP toughening during cryogenic impact deformation, helping to arrest crack propagation. There is a general inverse relationship between strength and toughness in low‐carbon steels. The transformation‐induced plasticity (TRIP) effect of retained austenite (RA) can help overcome this contradiction by providing strain hardening and transformation toughening during service. In this study, the effect of RA on the microstructure evolution, cryogenic mechanical properties, and fracture behavior of multi‐alloyed Ni‐containing steel is explored. Two well‐established techniques are employed to tailor the RA: quenching–intercritical tempering (QIT) and quenching–lamellarizing–intercritical tempering (QLIT). QLIT steel has a 25.1 vol% RA fraction, which is twice that of QIT steel, and offers exceptional stability at –196 °C. As a result, QLIT steel exhibits superior cryogenic mechanical properties in comparison to QIT steel, including a 6.9% increase in yield strength up to 1228 MPa, a 36.6% increase in elongation up to 33.2%, and a 147.4% increase in impact energy up to 193 J. These improvements are due to the higher fraction of RA transformed into the martensite during tensile deformation, resulting in an enhanced TRIP effect and increased work‐hardening rate. The exceptional stability of the RA also provides more sustainable TRIP toughening during cryogenic impact deformation, which helps to arrest crack propagation.

Design of Reduced Activation Ferritic/Martensitic Steels by Multiphase Optimization During the Entire Processing

A Novel Additive Manufactured Reduced Activation Ferritic/martensitic Steel Enhanced by In-Situ Nanoparticles Benefiting from Oxygen Addition

Strain-induced Refinement and Thermal Stability of a Nanocrystalline Steel Produced by Surface Mechanical Attritiontreatment

Understanding the mechanical properties of reduced activation steels

Enhanced strength-ductility synergy of selective laser melted reduced activation ferritic/martensitic steel via heterogeneous microstructure modification

Heterogeneous microstructure and anisotropic mechanical properties of reduced activation ferritic/martensitic steel fabricated by wire arc additive manufacturing

Multiscale Simulation of Yield Strength in Reduced-Activation Ferritic/Martensitic Steel

Tailoring the strength and impact toughness of 9Cr1.5Mo1Co steel by optimizing ultra-fine martensite and retained austensite

Influence of austenitizing temperature on the mechanical properties and microstructure of reduced activation ferritic/martensitic steel

Improving the Cryogenic Strength–Ductility–Toughness of Multi‐Alloy Steel by Optimizing the Feature of Retained Austenite

Review on development of reduced activated ferritic/martensitic steel for fusion reactor

Study on the Formation and Mechanical Stability of Retained Austenite in Complex Phase Steel with High Formability

Microstructure and mechanical properties of multi-component nano oxide-dispersion strengthened RAFM steel fabricated via laser powder bed fusion

Development of reduced activation ferritic/martensitic steels in China

Microstructure and tensile properties of nano-sized ZrC particle strengthened RAFM steels

Enhanced Disperse Ta(C, N) Precipitation in Reduced Activation Ferritic/martensitic Steels by Optimized Two-Step Austenitizing

Cr-enriched carbide induced stabilization of austenite to improve the ductility of a 1.7 GPa−press-hardened steel

Developing of containing Ta, Zr reduced activation ferritic/martensitic (RAFM) steel with excellent creep property

Enhanced mechanical properties of a high-carbon martensite steel processed by heavy warm rolling and tempering

Design of comprehensive mechanical properties by machine learning and high-throughput optimization algorithm in RAFM steels

Thermo-kinetic Design of Retained Austenite in Advanced High Strength Steels