Abstract:Silicon carbide (SiC) power devices possess many beneficial properties for power electronics applications, but commercial 62-mm SiC power module packages with the direct drop-in replacement of Si devices limit many benefits of these SiC power devices. To fully utilize the advantages of the SiC power devices, this article presents a low-profile and high power density packaging solution of a 62-mm 1200-V/300-A SiC power module with enhanced electrical and thermal performance. The design optimizations on layout, chip placement, and terminal structure are compatible with the conventional module fabrication processes. An increase of power density by threefold is achieved with a low-profile package by reducing the height of the terminal connectors. Moreover, lower voltage overshoots of gate–source and drain–source of the proposed module are demonstrated due to low inductance in both gate and power loops. Thermal simulations show that the proposed module has a lower peak junction temperature and a more balanced temperature distribution among paralleled devices. Finally, the commercial and fabricated modules are characterized experimentally under the same conditions. Both simulation and experimental results show that the gate and power loop inductances of the proposed module are reduced by 96% and 76%, respectively. Moreover, the total switching loss and drain–source voltage overshoot are reduced by 44% and 54%, respectively, at 300 A using a 2- $Omega $ external gate resistor.

Development of Pressure Contact Technology for Multi-chip SiC Modules with Low Parasitics

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

A Solution to Press-Pack Packaging of SiC MOSFETS

Design and evaluation of press-pack SiC MOSFET

Interleaved Planar Packaging Method of Multichip SiC Power Module for Thermal and Electrical Performance Improvement

Investigation of Low-Profile, High-Performance 62-mm SiC Power Module Package

Compact Sandwiched Press-Pack SiC Power Module With Low Stray Inductance and Balanced Thermal Stress

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

Design Method for Multichip Double-Sided Cooling Power Module with Multidimensional Self-and Mutual Inductances

Multichip Parallel Double-Sided Cooling Silicon Carbide Power Module With Low Parasitic Inductance and Balanced Dynamic Current

A SiC Double-Sided Stacked Wire-Bondless Power Module for High-Frequency Power Electronic Applications

Analysis of Novel Packaging Techniques for High Power Electronics in SiC

A Novel SiC MOSFET Module for High-power Soft-switching Converter

Analysis of A Low-Inductance Packaging Layout for Full-Sic Power Module Embedding Split Damping

Compact Spatially Symmetric Double-Sided Embedded Packaging Method for Parallel SiC MOSFETs

Design, Packaging and Evaluation of an All-SiC-Based Four-Level ANPC Power Module

A Highly Integrated Multichip SiC MOSFET Power Module With Optimized Electrical and Thermal Performances

A Novel Multiple DBC-staked Units Package to Parallel More Chips for SiC Power Module

Design and Current Balancing Optimization of A 1700V/1000A Multi-chip SiC Power Module

Performance Optimization of A 1.2kv SiC High Density Half Bridge Power Module in 3D Package

A Novel Double-sided Cooling 3L-ANPC SiC MOSFET Power Module with Interleaved Layout