Abstract:The silicon carbide (SiC) power module is one of the most popular semiconductor devices in industrial applications with the enhanced current rating. In this paper, a 1200-V/200-A SiC three-level (3L) module with neutral point clamped (NPC) topology is designed and validated. Compared with other existing works, the drain current of the designed module is accurately measured by a custom-made current transformer (CT) combined with a commercially off-the-shelf current probe (CP), which is critical for power loss evaluation. Based on the simulation and experiment results, it can be found that the maximum internal commutation loop stray inductance is no more than 40 nH, and the total switching loss can be reduced more than 30$\%$ compared with the hybrid 3L NPC module (Si IGBTs+SiC SBDs). Meanwhile, the power loss evaluation demonstrates that the designed 3L NPC module with all-SiC device is more suitable for high-voltage and high-frequency applications compared with its 2L counterpart, and the thermal simulation shows that the maximum junction temperature is less than 120 ${}^{\circ }$C when the module operates as a buck converter with $V_{DC}$ = 600 V, $I_{o}$ = 150 A, and $f_{s}$ = 100 kHz. In addition, compared with the 2L module, the 3L one presents enhanced spectrum amplitude in the high frequency (HF) range ($\ge$ 10 MHz) for the high-voltage applications, which indicates higher electromagnetic interference (EMI) noise. Then, two types of sunbber circuits are used to suppress the HF oscillation of the SiC 3L NPC module and alleviate the EMI noise as well according to the experiment results.

Design, Packaging and Evaluation of an All-SiC-Based Four-Level ANPC Power Module

Design and Evaluation of a SiC and Si IGBT Hybrid Three-Level ANPC Power Module

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

High Power Three-Level Rectifier Comprising SiC MOSFET & Si Diode Hybrid Power Stage

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module

A Novel Double-sided Cooling 3L-ANPC SiC MOSFET Power Module with Interleaved Layout

Investigation of Low-Profile, High-Performance 62-mm SiC Power Module Package

Analysis of A Low-Inductance Packaging Layout for Full-Sic Power Module Embedding Split Damping

A Novel SiC MOSFET Module for High-power Soft-switching Converter

Design and Demonstration of a Medium-Voltage High-Power All Silicon Carbide ANPC Converter with Optimized Busbar Architecture

A SiC & Si Hybrid Four-Level ANPC Converter with Multi-Step Soft-Switching Modulation Achieving Capacitor Voltage Balancing

An Extremely High Efficient Three-Level Active Neutral-Point-Clamped Converter Comprising SiC and Si Hybrid Power Stages

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

Performance Optimization of A 1.2kv SiC High Density Half Bridge Power Module in 3D Package

A Highly Integrated Multichip SiC MOSFET Power Module With Optimized Electrical and Thermal Performances

Performance of a 1.2kV, 288A full-SiC MOSFET module based on low inductance packaging layout

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

A Double-Sided Cooling 6.5kv SiC MOSFET Power Module with Insulation Enhancement Design

Design and evaluation of press-pack SiC MOSFET

10-kV SiC MOSFET Power Module With Reduced Common-Mode Noise and Electric Field