Abstract:The silicon carbide (SiC) power module is one of the most popular semiconductor devices in industrial applications with the enhanced current rating. In this paper, a 1200-V/200-A SiC three-level (3L) module with neutral point clamped (NPC) topology is designed and validated. Compared with other existing works, the drain current of the designed module is accurately measured by a custom-made current transformer (CT) combined with a commercially off-the-shelf current probe (CP), which is critical for power loss evaluation. Based on the simulation and experiment results, it can be found that the maximum internal commutation loop stray inductance is no more than 40 nH, and the total switching loss can be reduced more than 30$\%$ compared with the hybrid 3L NPC module (Si IGBTs+SiC SBDs). Meanwhile, the power loss evaluation demonstrates that the designed 3L NPC module with all-SiC device is more suitable for high-voltage and high-frequency applications compared with its 2L counterpart, and the thermal simulation shows that the maximum junction temperature is less than 120 ${}^{\circ }$C when the module operates as a buck converter with $V_{DC}$ = 600 V, $I_{o}$ = 150 A, and $f_{s}$ = 100 kHz. In addition, compared with the 2L module, the 3L one presents enhanced spectrum amplitude in the high frequency (HF) range ($\ge$ 10 MHz) for the high-voltage applications, which indicates higher electromagnetic interference (EMI) noise. Then, two types of sunbber circuits are used to suppress the HF oscillation of the SiC 3L NPC module and alleviate the EMI noise as well according to the experiment results.

Design and Demonstration of a Medium-Voltage High-Power All Silicon Carbide ANPC Converter with Optimized Busbar Architecture

Structural Design of A Five-Level Hybrid Active Npc Converter for High Power Density Motor Drives

Performance Analysis of a Single-phase GaN-based 3L-ANPC Inverter for Photovoltaic Applications

Design, Packaging and Evaluation of an All-SiC-Based Four-Level ANPC Power Module

Design of CRM AC/DC Converter for Very High-Frequency High-Density WBG-based 6.6kw Bidirectional On-Board Battery Charger

Ultra-Low Inductance Design for A Gan Hemt Based 3L-Anpc Inverter

Design and Evaluation of a 1200-V/200-A SiC Three-Level NPC Power Module

An Extremely High Efficient Three-Level Active Neutral-Point-Clamped Converter Comprising SiC and Si Hybrid Power Stages

Space Vector Modulation for SiC & Si Hybrid Active Neutral Point Clamped Converter

A High Power Density 3-Phase/1-phase Compatible MISN-PFC Converter for On-Board Charger

Space Vector Modulation for SiC and Si Hybrid ANPC Converter in Medium-Voltage High-Speed Drive System

A Novel Single-Stage Five-Level Common-Ground-Boost-Type Active Neutral-Point-Clamped (5L-CGBT-ANPC) Inverter

A SiC & Si Hybrid Four-Level ANPC Converter with Multi-Step Soft-Switching Modulation Achieving Capacitor Voltage Balancing

Single Phase High Power Density MISN PFC Converter

Study And Design Of Noninductive Bus Bar For High Power Switching Converter

Design of Ac/dc Converter for Bidirectional On-Board Battery Charger with Minimizing the Amount of SiC MOSFET

Design and Evaluation of a SiC and Si IGBT Hybrid Three-Level ANPC Power Module

Three Phase PFC Converter with Multilevel Inductive Switching Network

Quasi Two-Level Operation and Neutral-Point Voltage Balance Method for a Four-Level ANPC Based Dual Active Bridge DC-DC Converter

Generalized Construction Method and Phase-Disposition PWM for SiC & Si Hybrid Multilevel Active-Neutral-Point-Clamped Converter

Study On Planar Busbar Regarding Stray Inductance Minimization And Oscillation Suppression For High Power Converter