Abstract:To take full advantages of Wide Bandgap power semiconductor devices, breakthroughs on power module development are heavily explored nowadays. This paper introduces a 1.2kV SiC half bridge intelligent power module utilizing 80μm flexible epoxy-resin as substrates instead of traditional Direct-bonded Copper, for better thermal-stress management and lower cost. The investigation on the flexible epoxy-resin material indicates that it has low leakage current even at 250 °C, and high thermal conductivity up to 8 W/mK. No bonding wires are applied in the half bridge power module, instead, double-side solderable SiC MOSFET and diodes are fabricated and utilized for low parasitics and double-side cooling function. To further decrease the entire parasitic inductance on the power loop, a “Stack Structure” is proposed in this work to vertically connect highside and lowside switches with lower interconnection path than traditional power module technology. Simulation indicates that the parasitic inductance on the power loop is less than 1.5 nH. More functionality is achieved by integrating the main power stage with gate driver circuits. Digital isolations are also included in the half bridge module, together with a Low Dropout regulator to eliminate the numbers of auxiliary power supply required by the power module. The size of the entire module is about 35mm × 15mm ×7mm. Electrical simulations and measurements, including leakage current, parasitic extractions, device characteristics, verified that the designed module can work properly with no degradation on the SiC devices, with 12ns turn-off and 48ns turn-on at 800V bus voltage, and 0.63 mJ, 0.23 mJ as turn-on and turn-off loss, respectively.

A SiC Double-Sided Stacked Wire-Bondless Power Module for High-Frequency Power Electronic Applications

Design of Low Parasitic Inductance SiC MOSFETs Halfbridge Power Modules

Investigation of Low-Profile, High-Performance 62-mm SiC Power Module Package

A Double-Side Cooled SiC MOSFET Power Module With Sintered-Silver Interposers: I-Design, Simulation, Fabrication, and Performance Characterization

A Highly Integrated Multichip SiC MOSFET Power Module With Optimized Electrical and Thermal Performances

Design of a Novel Double Sided Cooling SiC Power Module Based on Multiple DBC-Stacked

Design and Evaluation of a Face-Down Embedded SiC Power Module With Low Parasitic Inductance and Low Thermal Resistance

Fan-Out Panel-Level PCB-Embedded SiC Power MOSFETs Packaging

A Novel SiC MOSFET Module for High-power Soft-switching Converter

Interleaved Planar Packaging Method of Multichip SiC Power Module for Thermal and Electrical Performance Improvement

Compact Sandwiched Press-Pack SiC Power Module With Low Stray Inductance and Balanced Thermal Stress

Characterization of a Bare-die SiC-based, Wirebond-less, Integrated Half-bridge with Multi-functional Bus-Bars

Design of a High-power Density Power Module with Large-area (10 Mm × 10 Mm) SiC MOSFETs for Traction Inverter Application

Flexible Epoxy Resin Substrate Based 1.2 Kv SiC Half Bridge Module with Ultra-low Parasitics and High Functionality

Direct Integration of Optimized Phase-Change Heat Spreaders Into SiC Power Module for Thermal Performance Improvements Under High Heat Flux

Multichip Parallel Double-Sided Cooling Silicon Carbide Power Module With Low Parasitic Inductance and Balanced Dynamic Current

A Quasi-Two-Level Medium-Voltage SiC MOSFET Power Module with Low Loss and Voltage Self-Balance

A Double-sided Cooled Power Module with Embedded Decoupling Capacitors

High power SiC inverter module packaging solutions for junction temperature over 220°C

Design and evaluation of press-pack SiC MOSFET

Design Method for Multichip Double-Sided Cooling Power Module with Multidimensional Self-and Mutual Inductances