Abstract:With the development of power modules for high voltage, high temperature, and high power density, their size is becoming smaller, and the packaging insulation experiences higher electrical, thermal, and mechanical stress. Packaging insulation needs to meet the requirement that internal electric field, temperature, and mechanical stress should be as low as possible. Focusing on the coupling principles and optimization design among electrical, thermal, and mechanical stresses in the power module packaging insulation, a multi-objective optimization design method based on Spice circuit, finite element field numerical calculation, and multi-objective gray wolf optimizer (MOGWO) is proposed. The packaging insulation optimal design of a 1.2 kV SiC MOSFET half-bridge power module is presented. First, the high field conductivity characteristics of the substrate ceramic and encapsulation silicone of the packaging insulation material were tested at different temperatures and external field strengths, which provided the key insulation parameters for the calculation of electric field distribution. Secondly, according to the mutual coupling principles among electric–thermal–mechanical stress, the influence of packaging structure parameters on the electric field, temperature, and mechanical stress distribution of packaging insulation was studied by finite element calculation and combined with Spice circuit analysis. Finally, the MOGWO algorithm was used to optimize the electric field, temperature, and mechanical stress in the packaging insulation. The optimal structural parameters of the power module were used to fabricate the corresponding SiC MOSFET module. The fabricated module is compared with a commercial module by the double-pulse experiment and partial discharge experiment to verify the feasibility of the proposed design method.

Design of Spacer in Silicon Carbide Double-Sided Cooling Packaging Based on Multiphysics Finite Element Topology Optimization

Design Method for Multichip Double-Sided Cooling Power Module with Multidimensional Self-and Mutual Inductances

Optimization Design of Packaging Insulation for Half-Bridge SiC MOSFET Power Module Based on Multi-Physics Simulation

Thermomechanical Stress Analysis, Characterization and Optimization for Double-Side Cooled Power Modules with Ceramic Substrate

Design of a Novel Double Sided Cooling SiC Power Module Based on Multiple DBC-Stacked

Interleaved Planar Packaging Method of Multichip SiC Power Module for Thermal and Electrical Performance Improvement

The Study on Thermal Coupling Effect for SiC Power Module Design Guidelines

Direct Integration of Optimized Phase-Change Heat Spreaders Into SiC Power Module for Thermal Performance Improvements Under High Heat Flux

A Double-sided Flip chip SiC Power Module with a Novel Flip Chip Method On DBC By PTFE Coating

Analysis of Novel Packaging Techniques for High Power Electronics in SiC

Overview of Finite-Element Analysis in Simulation of SiC Power Device Packaging

Enhanced Thermal Conductivity and Microwave Dielectric Properties by Mesostructural Design of Multiphase Nanocomposite

Compact Spatially Symmetric Double-Sided Embedded Packaging Method for Parallel SiC MOSFETs

A Novel SiC MOSFET Module for High-power Soft-switching Converter

Multichip Parallel Double-Sided Cooling Silicon Carbide Power Module With Low Parasitic Inductance and Balanced Dynamic Current

Analysis of A Low-Inductance Packaging Layout for Full-Sic Power Module Embedding Split Damping

Electrothermal Analysis of a Double-side Cooling Power Module with Large-area SiC MOSFETs

Compact Sandwiched Press-Pack SiC Power Module With Low Stray Inductance and Balanced Thermal Stress

Structure and the Thermal Management of a 3-D Silicon Carbide MOSFET Module

A Comprehensive Study on Electric Field Coupling Effects of Medium-Voltage SiC Power Module and Optimization Design

Thermal-mechanical-electrical Co-design of Fan-Out Panel-Level SiC MOSFET Packaging with a Multi-objective Optimization Algorithm