Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

The Shaking Table Test on a Prefabricated Integral Frame Shear Wall Structure with a New Prefabricated Floor

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Large-scale shaking table tests of a six-story floor-by-floor assembled CFS frame-framing shear wall structure

Shaking table test of fabricated concrete shear wall structure and study on damage mechanism of strong earthquake

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Seismic Performance of the Pre-Fabricated Steel Frame Infilled with AAC Wall Panels and Their Joint Connection: Full-Scale Shaking Table Test

Shaking table tests and seismic assessment of a full-scale precast concrete sandwich wall panel structure with bolt connections

Simulation of shake‐table test for a two‐story low‐damage concrete wall building

Simplified Analytical Model and Shaking Table Test Validation for Seismic Analysis of Mid-Rise Cold-Formed Steel Composite Shear Wall Building

Seismic Performance of Enclosure Wall in Postearthquake Temporary Prefabricated Light-Weight Steel Structure

Seismic performance of a frame‐supported shear wall over‐track building through shaking table test

Experimental study on seismic performance of T‐shaped partly precast reinforced concrete shear wall with grouting sleeves

A Substructural Shake Table Testing Method for Full-Scale Nonstructural Elements

In-Plane Strengthening Effect of Prefabricated Concrete Walls on Masonry Structures: Shaking Table Test

An exhaustive research and analysis on seismic performance of prefabricated concrete shear wall structure

Shake table tests on a full-scale six-storey cold-formed thin-walled steel-steel plate shear wall structure

Shaking table test and oretical analysis on RC frame-shear wall structures with special-shaped columns

Seismic Performance of a Full-Scale Two-Story Reinforced Concrete Frame with Shale Sintered Wallboards Tested on a Shake Table

A Restoring Force Model for Prefabricated Concrete Shear Walls with Built-In Steel Sections

Seismic performance of a new type of precast shear walls with non-connected vertical distributed reinforcement