Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

A Substructural Shake Table Testing Method for Full-Scale Nonstructural Elements

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

A Novel Control Strategy for Reproducing the Floor Motions of High-Rise Buildings by Earthquake-Simulating Shake Tables

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

NetSLab based remote hybrid dynamic testing method for single story structures

A Building-Specific Dynamic Loading Protocol for Experimental Tests on Nonstructural Elements

A Substructure Shaking Table Test for Reproduction of Earthquake Responses of High‐rise Buildings

Sesmic Testing Method of Building with First-soft-Story

Real Time Dynamic Hybrid Testing Using Shake Tables and Force-Based Substructuring

Simulation of shake‐table test for a two‐story low‐damage concrete wall building

REAL-TIME DYNAMIC HYBRID TESTING BASED ON SHAKING-TABLE AND ITS APPLICATION TO A TWO STOREY RIGID FRAME

Performance extension of shaking table‐based real‐time dynamic hybrid testing through full state control via simulation

Data‐Driven Structural Health Monitoring on Shaking Table Tests of a 3‐Story Steel Building with Sliding Slabs

Modal characterization of a three‐story buckling‐restrained braced frame steel building by non‐destructive field testing

Implementation of real-time hybrid simulation using a large shake table with onboard actuators

Shake table tests on a full-scale six-storey cold-formed thin-walled steel-steel plate shear wall structure

Shaking Table Test and Finite Element Analysis of Low-rise Cold-formed Thin-walled Steel Residential Buildings

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams

One-way shaking table test study of resilient steel frame with seismic isolated floor system