Abstract:In the seismic design of acceleration-sensitive nonstructural components, floor acceleration response spectra are commonly selected for analysis, which has proven to be effective in practice. To accurately study the floor acceleration response spectrum of a reinforced concrete structure under earthquakes, a 3-story reinforced concrete frame structure designed based on Chinese codes was built and placed on a shaking table for testing to obtain actual floor acceleration response for investigation of spectral characteristics. In addition, a set of finite element models of reinforced concrete frame buildings were analyzed to better study the variation of floor acceleration peaks and response spectra with different modal periods. The results show that floor dynamic magnification is highly related to structural dynamic characteristics and building's relative height. Obvious peaks are observed in the floor response spectrum, which correspond to the structural modal periods. The values of the spectra, particularly the peaks, show a strong correlation with the floor level and the damping ratios of nonstructural components. Based on the observations gained from shaking table tests and numerical study, a function for predicting the floor dynamic magnification factor and a method for generating the spectral amplification factor of the floor are proposed. Then the findings acquired from the test, numerical study, and existing methods were applied for the validation of the proposed methods. It is shown that the proposed floor dynamic magnification factor prediction function and spectral amplification factor prediction method are useful for the seismic design of nonstructural components in various reinforced concrete structures, taking into account the structural dynamic characteristics, the floor level, and the damping ratio of nonstructural components.

A Building-Specific Dynamic Loading Protocol for Experimental Tests on Nonstructural Elements

A Substructural Shake Table Testing Method for Full-Scale Nonstructural Elements

Experimental Methods for Seismic Simulation of Structural Columns: State-of-the-Art Review and Introduction of New Multiuse Structural Testing System

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Remote Hybrid Testing of Asymmetric Structures under Earthquake Excitation

Development of Structural Testing Equipment for Impact and Complex Loading

Earthquake Simulation Testing Research for Large-scale Structural Columns

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

NetSLab based remote hybrid dynamic testing method for single story structures

Remote Collaborative Pseudo-dynamic Tests of a Ten-story Concrete Filled Steel Tubular Composite Frame

Full-scale Steel Column Tests under Simulated Horizontal and Vertical Earthquake Loadings

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Floor acceleration amplification and response spectra of reinforced concrete frame structure based on shaking table tests and numerical study

Dynamic cyclic loading tests for investigating the influence of loading rate and axial force on the lateral response of RC columns

A Novel Control Strategy for Reproducing the Floor Motions of High-Rise Buildings by Earthquake-Simulating Shake Tables

Peak Acceleration Response Spectrum of Long Span Floor Vibration by Pedestrian Excitation

MULTIPLE DIMENSIONAL LOADING AND CONTROL IN STRUCTURAL TEST

A shake table protocol for seismic assessment and qualification of acceleration‐sensitive nonstructural elements

Seismic response and capacity of inelastic acceleration‐sensitive nonstructural elements subjected to building floor motions

Simulation of shake‐table test for a two‐story low‐damage concrete wall building

Dynamic behavior and pseudo-dynamic loading test of composite slim floor