Abstract:Conventional reinforced concrete shear walls are widely used as primary lateral-force-resisting members owing to their high in-plane stiffness. However, some of these walls have been severely damaged in past earthquakes because of their limited energy dissipation capacity and ductility, thus requiring laborious repairs or even demolition. Self-centering rocking walls have recently been developed and proven effective for reducing the damage and residual displacement of structures after earthquakes. Because self-centering rocking walls are usually constructed by releasing constraints at the foundation, their contribution to structural stiffness may be limited, and they are very vulnerable to vibration. To overcome these limitations, a shear wall with variable phases of deformation was proposed; this wall consists of a rocking bearing, low-strength concrete zones, and buckling-restrained rebars. With increasing seismic intensity, the proposed wall first exhibits the shear-bending deformation mode of conventional reinforced concrete shear walls, which transitions into the rocking deformation mode of self-centering rocking walls. Cyclic loading tests were conducted to investigate the seismic performance of the proposed wall. The results demonstrated that the presented concept of the mechanism transformation is feasible in practice, and compared with conventional shear walls, the proposed wall displays improved seismic performance in terms of the damage mechanism, lateral resistance degradation, and deformation capacity. Moreover, a spring-truss model and a performance prediction model were also developed to predict the seismic performance of the proposed wall. Validating the predictions of the analytical models against the test results confirmed the accuracy of the developed models.

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Experimental study and FEM analysis on seismic behavior of a three-storied structural wall

Shear transfer mechanism of a multi-storied structural wall under the cyclic lateral load: experiment and detachment model

Shear transfer mechanism of a multi-storied shear wall with peripheral members

Experimental investigation on seismic behavior of S350 light-gauge composite framing walls

Shear Behaviour of Reinforced Concrete Structural Walls with Eccentric Openings under Cyclic Loading: Experimental Study

Experimental study of precast concrete coupled walls

Experimental Study on the Seismic Behavior of a Frame-Supported Reinforced Masonry Short-Limb Shear Wall Structure

Seismic behavior of composite shear walls incorporating high-strength materials and CFST boundary elements

Experimental and Analytical Lateral Performance of Shear Walls with Variable Phases of Deformation

Seismic behavior of reinforced concrete shear walls subjected to high axial loading

Experimental Study Study On Seismic Behaviour Of An Innovative Composite Shear Wall

Experimental Investigation Of Self-Centering Hybrid Concrete Shear Walls Subjected To Horizontal Cyclic Loading

The Effects of Applied Axial Stress on Lateral Bearing-Load Capacity for Fully Grouted Reinforced Concrete Masonry Shear Walls

Seismic behaviour of composite shear walls with multi-embedded steel sections. Part I: experiment

Large-scale shaking table tests of a six-story floor-by-floor assembled CFS frame-framing shear wall structure

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Seismic behavior of prefabricated concrete filled steel tube-bordered monolayer reinforced shear wall

In-Plane Cyclic Response of Reinforced Concrete Masonry Shear Wall with Large Cross-Section Core Columns

Cyclic Loading Experiments on Seismic Performance of Precast Concrete Superposed Shear Walls with CFST End Columns