Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Large-scale shaking table tests of a six-story floor-by-floor assembled CFS frame-framing shear wall structure

Seismic Behavior of Composite Shear Walls Incorporating Concrete-Filled Steel and FRP Tubes As Boundary Elements

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Experimental study and numerical simulation of seismic performance of stiffened thin steel plate shear walls considering the effect of vertical load on frame column

Shake table tests on a full-scale six-storey cold-formed thin-walled steel-steel plate shear wall structure

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Subassemblage Tests on Seismic Behavior of Double-Corrugated-plate Shear Walls

Seismic Behaviour Of Concrete-Filled Steel Tubular Frame To Rc Shearing Wall High-Rise Mixed Structures

Experimental study and FEM analysis on seismic behavior of a three-storied structural wall

Simplified Analytical Model and Shaking Table Test Validation for Seismic Analysis of Mid-Rise Cold-Formed Steel Composite Shear Wall Building

Seismic behaviour of concrete-filled steel tubular frame to RC shear wall high-rise mixed structures

Experimental Study on Seismic Performance of Mid-Rise Composite Shear Walls with CFT Columns and Embedded Steel Plate

Seismic behavior of prefabricated frame with special‐shaped concrete‐filled steel tubular columns and H‐shaped steel beams

Seismic performance of a frame‐supported shear wall over‐track building through shaking table test

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Shaking table test of fabricated concrete shear wall structure and study on damage mechanism of strong earthquake

Experimental Study on the Seismic Behavior of a Frame-Supported Reinforced Masonry Short-Limb Shear Wall Structure

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Seismic Behavior of Cfst-Enhanced Steel Plate-Reinforced Concrete Shear Walls