Abstract:Suspended building structures have inherent architectural aesthetics and are able to achieve low seismic-induced displacements of the primary structure and accelerations of the suspended segments. A recently proposed subtype of suspended building structures harnesses discrete prefabricated modules to overcome the fragility originating from inter-story drift within the suspended segment and to enhance the overall attenuation. This paper presents the first shake table experimental study of this subtype to directly evaluate its aseismic performance and develop a physics-based modeling strategy that is validated and therefore is reliable. For this purpose, 1:15 scaled shake table experiments of modularized suspended structures were conducted with three fundamental configurations. Each model in each configuration was subjected to at least five ground motions. Results indicate that displacements at the top of the primary structure are reduced by around 50%; in the structure with discrete modules and inter-story dampers, quicker decay was shown, accompanied by lower accelerations of the modules. The inter-story drift ratio of the suspended segment reached 3.75% under 0.12 g PGA excitation, indicating the potential of drift-induced fragility if a regular structure is adopted and proving the benefit of modularization. Numerical models of the tested structural systems have been developed in OpenSees platform. Simulated responses show satisfactory agreement with the measured ones. Subsequent parametric analyses reveal that the performance is sensitive to both the stiffness and damping values especially when the damper is of viscous type. Optimal stiffness facilitates tuning between the primary and secondary structures while optimal damping enhances dissipation notably. Moreover, it is observed that the inherent friction handicaps dissipation instead of facilitating it.

A shake table protocol for seismic assessment and qualification of acceleration‐sensitive nonstructural elements

Seismic response and capacity of inelastic acceleration‐sensitive nonstructural elements subjected to building floor motions

A Substructural Shake Table Testing Method for Full-Scale Nonstructural Elements

A Building-Specific Dynamic Loading Protocol for Experimental Tests on Nonstructural Elements

On the Use of Accelerometric Data to Monitor the Seismic Performance of Non-Structural Elements in Existing Buildings: A Case Study

A Novel Control Strategy for Reproducing the Floor Motions of High-Rise Buildings by Earthquake-Simulating Shake Tables

A Substructure Shaking Table Test for Reproduction of Earthquake Responses of High‐rise Buildings

DEVELOPMENT OF SHAKING TABLE EXPERIMENT METHOD TO REPRODUCE RESPONSES OF HIGH-RISE BUILDINGS UNDER GROUND MOTION

Seismic Damage Assessment of Instrumented Wood-frame Buildings: A Case-study of NEESWood Full-scale Shake Table Tests

System identification of a full‐scale five‐story reinforced concrete building tested on the NEES‐UCSD shake table

Development of Dynamic Laboratory Platform for Earthquake Engineering Courses

Advanced Video-Based Processing for Low-Cost Damage Assessment of Buildings under Seismic Loading in Shaking Table Tests

Real Time Dynamic Hybrid Testing Using Shake Tables and Force-Based Substructuring

DEVELOPMENT OF SHAKING TABLE TEST TECHNIQUES TO REALIZE LARGE RESPONSES AND EVALUATION OF SAFETY OF A HIGH-RISE BUILDING

Shake table testing and computational investigation of the seismic performance of modularized suspended building systems

Influence of the construction process and nonstructural components on the modal properties of a five‐story building

Floor acceleration amplification and response spectra of reinforced concrete frame structure based on shaking table tests and numerical study

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams

Vision‐based monitoring system for in‐plan seismic tests conducted on a shaking table: The case study of prefabricated concrete shells

Modal Identification of a 5-Story RC Building Tested on the NEES-UCSD Shake Table

Development of a Versatile Hybrid Testing System for Seismic Experimentation