Abstract:Summary To support the development of low‐damage concrete structures, a system‐level shake‐table test of a two‐story concrete wall building implementing state‐of‐the‐art design concepts was conducted using the multi‐functional shake‐table array at Tongji University as part of an international collaborative project. The test building was designed with a perimeter frame and exterior post‐tensioned concrete walls in both directions. Different floor systems and wall‐to‐floor connections were incorporated in the test building to compare a number of design concepts and construction details. A range of energy dissipation devices were installed at the wall base and/or slotted‐beam joints of the test building. To simulate the test building response during the shake‐table tests, numerical models of the test building in both the longitudinal and transverse directions were established in OpenSees. Because the test building utilized flexible and isolated wall‐to‐floor connections that specifically reduced potential wall‐to‐floor interaction, planar frame numerical models were selected to represent the test building in each direction of loading. In the models, fiber hinge elements were used to simulate the unbonded post‐tensioned walls and a modified multi‐truss spring method was adopted to simulate the slotted‐beam joints with and without dampers. Inelastic time‐history analyses of the numerical models were conducted considering three earthquake intensities and comparisons of the test and simulation responses of the building are presented. The simulation results showed that the analytical model established in this study could reasonably predict both the global and local responses of the test building under different shaking intensities.

DEVELOPMENT OF SHAKING TABLE EXPERIMENT METHOD TO REPRODUCE RESPONSES OF HIGH-RISE BUILDINGS UNDER GROUND MOTION

A Substructure Shaking Table Test for Reproduction of Earthquake Responses of High‐rise Buildings

DEVELOPMENT OF SHAKING TABLE TEST TECHNIQUES TO REALIZE LARGE RESPONSES AND EVALUATION OF SAFETY OF A HIGH-RISE BUILDING

Implementation of real-time hybrid simulation using a large shake table with onboard actuators

Seismic Damage Detection of A Full-Scale Shaking Table Test Structure

A Substructural Shake Table Testing Method for Full-Scale Nonstructural Elements

A Novel Control Strategy for Reproducing the Floor Motions of High-Rise Buildings by Earthquake-Simulating Shake Tables

Large Earthquake Simulation Test on the (φ)2800 mm Unanchored Metal Liquid Storage Tanks

Dynamic Response of Underground Structures in Sand: Experimental Data

Development of 6 Degrees of Freedom Parallel‐Link Shaking Table for Three‐Dimensional Movement on Centrifugal Loading Device

Large shaking table tests of pile-supported structures in different ground conditions

A pneumatic shaking table and its application to a liquefaction test on saturated sand

Shaking Table Test and Dynamic Response Prediction on an Earthquake-Damaged RC Building

Simulation of shake‐table test for a two‐story low‐damage concrete wall building

Dynamic model of the UC San Diego NHERI six‐degree‐of‐freedom large high‐performance outdoor shake table

Nonlinear Modeling of the Ten-Story RC Building Structure of 2015 E-Defense Shaking Table Tests

REAL-TIME DYNAMIC HYBRID TESTING BASED ON SHAKING-TABLE AND ITS APPLICATION TO A TWO STOREY RIGID FRAME

Development of a Versatile Hybrid Testing System for Seismic Experimentation

Shaking Table Test on the Seismic Response of a Frame-Type Subway Station in Composite Soil

Development of Dynamic Laboratory Platform for Earthquake Engineering Courses

Vision-aided nonlinear control framework for shake table tests