Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Shake table testing and computational investigation of the seismic performance of modularized suspended building systems

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams

Shaking Table Tests on 0.5-Scale Multistory Models of Plate-Type Modular Steel and Composite Buildings with Semi-Rigid Corner Connections

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Horizontal Shaking Table Tests on a Four-Story Prototype Structure Using Multi-Dimensional Earthquake Isolation and Mitigation Devices

Shake table tests and numerical investigation of a resilient damping device for seismic response control of building structures

Shake Table Tests of a Full-Scale Two-Story Plate-Type Modular Composite Building with Semi-Rigid Corner Connections

Shaking Table Investigations on the Seismic Performance of a Steel Frame with Optimized Passive Energy Dissipation Devices

Experimental study on effect of assembly process on seismic performance of modular precast composite shear wall structures

A Substructural Shake Table Testing Method for Full-Scale Nonstructural Elements

Seismic design and parametric study of steel modular frames with distributed seismic resistance

Seismic mitigation of steel modular building structures through innovative inter-modular connections

Simulation of shake‐table test for a two‐story low‐damage concrete wall building

Seismic performance assessment of new dry‐assembled prefabricated composite shear wall system with beam‐only connection

Shaking table test and seismic behaviour evaluation of viscous damping wall with amplification mechanism

Seismic Performance and Storey-Based Stability of Suspended Buildings

New modular precast composite shear wall structural system and experimental study on its seismic performance

Seismic Behavior of Suspended Building Structures with Semi-Rigid Connections

Shake table test on a five-story residential masonry building strengthened by engineered cementitious composites based on minimum disturbance

Seismic responses analysis of multi-story suspended floors system

Investigation on multi-directional free-standing-object-structure interactions in mega-sub-control suspended buildings with tuning features