Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Seismic responses analysis of multi-story suspended floors system

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Pseudo-dynamic testing of hybrid frame with steel beams bolted to CFT columns

Study on remote collaborative pseudo-dynamic tests of multi-story frames

Seismic analysis of two typical spatal structures under multi-support vertical excitations

Response Spectra of Two-Story Frames with Racks on the Elastic Floor

Seismic Performance and Storey-Based Stability of Suspended Buildings

Dynamic responses of multi-story structural systems with separated gravity and lateral resisting systems under seismic action considering connection semi-rigidity effects

Seismic Behavior of Suspended Building Structures with Semi-Rigid Connections

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Seismic response of non-structural components in multi-storey steel frames

Floor acceleration amplification and response spectra of reinforced concrete frame structure based on shaking table tests and numerical study

Dynamic Characteristic and Aseismatic Analysis of High-rise Steel Structure Building with Horizontal Strengthened Floors

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Seismic behavior of highly irregular structures with multiple passive energy dissipation system: Case study of a single‐column elevated station

Seismic performance evaluation of a novel resilient steel frame with self-centering rocking columns and replaceable energy-dissipating connections for low-rise structures

An efficient method based on shear models for structural seismic response prediction considering hysteretic characteristics

Seismic Analysis of Friction-Damped Self-Centering Coupled-Beams for Moment-Resisting-Frames without Floor Elongation

Comparative seismic analysis of frames with shape memory alloy slip friction dampers

Seismic Response Analysis of Adding Extra-floors Spanning Existing Building with Steel Structure