Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Calculation and Analysis of A Tall Building Seismic Isolation Design

Research on Base Isolation for Seismic Retrofitting of Adjacent Structures Connected with a Large Floor

Research on Structural Design of an Isolated High-Rise Building with Enlarged Base and Multiple Tower Layer in High-Intensity Area

High-performance Isolation Systems with Rate-Independent Linear Damping for Seismic Protection of High-Rise Buildings

Experimental Study and Seismic Assessment on Base Isolated Precast Concrete Frame Structure with Box Connectors

Seismic response analysis of super-high-rise building structures with three-layer isolation systems

Analysis of Frame Structure Base-Isolation Based on ETABS

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Inter-Storey Isolation Versus Base Isolation Using Friction Pendulum Systems

Applying Vibration Isolated Technology to Enforce the Seismic Resistant Capacity of Building Structure

Seismic Performance of Multi Story Building with Different Base Isolators

Shaking table test and comparison analysis for base-isolated high-rise buildings with different aspect ratios

Shaking table test of a steel frame structure with layered three‐dimensional isolation

A new form of steel base isolation system for seismic high-rise building

Seismic Response and Parametric Analysis of Inter-Story Isolated Tall Buildings Based on Enhanced Simplified Dynamic Model

PERFORMANCE OF BASE-ISOLATED ADJACENT STRUCTURES WITH AN INTEGRATED BASE PLATE IN PREVENTING POUNDING UNDER EARTHQUAKE

Key Technologies Research on the Response of a Double-Story Isolated Structure Subjected to Long-Period Earthquake Motion

Theoretical analysis and shaking table tests of old masonry structure reinforced by external frames with added stories on the top using seismic isolation technology

Comparison of the Seismic‐resilient Design of Seismically Isolated Reinforced Concrete Frame Structures Using Two Codes

Analysis on the Torsion Parameters of L-shaped High-Rise Isolation Buildings