Abstract:Passive isolation has been widely accepted as an effective means for the protection of structures against seismic hazards. The isolation bearings, typically placed at the base of the structure, increase the flexibility of the structure and shift its fundamental frequency away from the dominant frequency of seismic excitations, resulting in significantly reduced interstory drifts and floor accelerations. During severe earthquakes, the performance of passive isolation systems is usually achieved at the expense of having large base displacements. Alternatively, active isolation combines isolation bearings with adaptive actuators to effectively mitigate the base displacements, while maintaining reasonable interstory drifts and floor accelerations. Despite successfully theoretical proof documented in previous studies, most experimental implementations only verified active isolation with unit-axial actuators under unidirectional excitations. Earthquakes are intrinsically multidimensional, resulting in out-of-plane responses such as torsional responses. Therefore, the focus of this paper is the development and experimental verification of active isolation strategies for multistory buildings subjected to bidirectional earthquake loadings. First, a model building is designed to be dynamically similar to a representative full-scale structure. The selected isolation bearings feature low friction and high vertical stiffness, providing stable behavior. In the context of the multidimensional response control, three custom-manufactured and appropriately scaled actuators are employed to mitigate both in-plane and out-of-plane responses. In addition, the structure is subjected to multi-directional earthquake ground motion. To obtain a high-fidelity model of the active isolation systems, the authors propose a hybrid identification approach, which combines the advantages of the lumped mass model and nonparametric methods. Control-structure interaction is also included in the identified model to further enhance the control authority. By employing the H-2/LQG control algorithm, the controllers for the hydraulic actuators are shown to offer high performance and good robustness. Active isolation is found to possess the ability to reduce base displacements and produce comparable accelerations and interstory drifts to passive isolation. The proposed active isolation strategies are validated experimentally for a six-story building tested on the six-degree-of-freedom shake table in the Smart Structures Technology Laboratory at the University of Illinois at Urbana-Champaign. Copyright (c) 2013 John Wiley & Sons, Ltd.

Seismic Performance of Multi Story Building with Different Base Isolators

Nonlinear seismic performance of a regular building using base isolation method

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Nonlinear Modal Time History Analysis on RC framed buildings with scrap tyre as the base isolator for Past Indian earthquakes

Multiaxial Active Isolation for Seismic Protection of Buildings

Application of Supplementary Inerter-Based Damping Devices Alongside Unbonded Fiber-Reinforced Elastomeric Isolators

Base Isolation for Seismic Retrofitting of a Multiple Building Structure: Design, Construction, and Assessment

Seismic responses of multi-story building isolated by Lead-Rubber Bearings considering effects of the vertical stiffness and buckling behaviors

Seismic Performance of Double Skin Semi-Base-isolated Structures

Shaking table experiments on framed structure resting on geogrid reinforced geotechnical seismic isolation system

Research on Structural Design of an Isolated High-Rise Building with Enlarged Base and Multiple Tower Layer in High-Intensity Area

A new form of steel base isolation system for seismic high-rise building

Seismic Performance Evaluation of Double-Skin Semi-Base-Isolated Building Using Incremental Dynamic Analysis

Shaking table and pseudodynamic tests for the evaluation of the seismic performance of base-isolated structures

Analysis, Design, and Construction of a Base-Isolated Multiple Building Structure

Frame Work on Performance-Based Seismic Design Theory of Base-Isolation Structures

Seismic Fragility Reduction for Base Isolated RC Frame Buildings by Curved Surface Sliding Bearings with Over-Stroke Displacement Capacity

Investigations of the effects of a passive bumper on the seismic response of base-isolated buildings: Experimental study and parameter optimization

Seismic Performance Evaluation According to HSS and CFST Columns of 3D Frame Buildings with Rubber Friction Bearing (RFB)

Does seismic isolation reduce the seismic vulnerability and the variability of the inelastic seismic response? Large-scale experimental investigation

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects