Abstract:There is currently growing concern within the earthquake engineering community regarding the potential for base-isolated structures to experience significant responses during extreme earthquakes. This concern is primarily driven by the observation that induced ground motions can contain influential long-period components, which may exacerbate the structural response. Supplementing damping using conventional damping devices contributed to a significant reduction in the responses whereas perhaps compromises the effects of base isolation itself when subjected to more frequently occurring short-period ground motions, particularly for base-isolated high-rise building structure. The present study employs rate-independent linear damping (RILD) to control the seismic response of high-rise building structures subjected to both short- and long-period ground motions. RILD is a damping mechanism that exerts a control force that is independent of the vibration frequency under harmonic deformation. This method is implemented in conjunction with isolators to achieve the desired control objectives. For passive realization of RILD, both the Maxwell-negative-stiffness (MNS) and modified tuned Maxwell–Wiechert (MTMW) models were considered. A regression technique is presented in this study to optimally design the properties of the MTMW model, and a recursive formulation is developed to conduct structural response history analyses efficiently. The proposed method for seismic protection of high-rise structures was demonstrated using a 20-story benchmark building structure as the analytical model. This approach serves to illustrate the advantages of the proposed method in a practical context. Both short- and long-period ground motions are used for examining the performance of rate-independent damping models incorporated into base-isolated high-rise structures. The findings suggest that the combined isolation systems, in conjunction with rate-independent linear damping (RILD), offer significantly enhanced protection against conventional short-period ground motions, without sacrificing performance during long-period ground motions. Compared to commonly utilized isolation systems, this approach demonstrates superior performance in safeguarding high-rise structures.

Influence of ground motion duration on seismic performance of RC frame isolated by high damping rubber bearings

Assessing the significance of nonlinear rotational behavior in high damping rubber bearings for seismic performance of base‐isolated RC frame building

Impact of ground motion duration on seismic performance of buckling restrained braced frames

Hysteretic behavior of high damping rubber bearings under multiaxial excitation

Mitigating ground motion duration impact on steel moment-resisting frames using viscous dampers

Experimental Study on Characteristics and Isolator Effect of High-damping Rubber Bearing

Behavior of high damping seismic isolation rubber bearings for bridges

Experimental Study of the Dynamic Behavior of High-Damping Rubber-Bearing Isolator

Influence of ground motion characteristics on the heating effect of lead‐rubber bearings in base‐isolated structures

Seismic Performance Evaluation According to HSS and CFST Columns of 3D Frame Buildings with Rubber Friction Bearing (RFB)

Comparative Studies of Base Isolation Systems Featured with Lead Rubber Bearings and Friction Pendulum Bearings

Experimental and Analytical Investigation of the Influence of Compressive Load on Rate-Dependent High-Damping Rubber Bearings

High-performance Isolation Systems with Rate-Independent Linear Damping for Seismic Protection of High-Rise Buildings

Experimental and analytical studies of seismic response of highway bridges isolated by rate-dependent rubber bearings

Effects of Ground Motion Duration on Seismic Damage of Bridge Isolation Bearings Based on Friction SDOF System

Seismic responses of multi-story building isolated by Lead-Rubber Bearings considering effects of the vertical stiffness and buckling behaviors

Seismic performance of a novel 3D isolation system on continuous bridges

Investigation on the Seismic Performance of RC Frame Buildings with Rubber Isolation Bearing Installed in Staircases

Seismic Performance Of A Multi-Span Rc Highway Bridge With High Damping Rubber Bearings

Shaking Table Tests and Numerical Studies on the Effect of Viscous Dampers on an Isolated RC Building by Friction Pendulum Bearings

DAMPING EFFECT ON A BASE ISOLATED STRUCTURE