Abstract:This paper presents a novel seismic isolation floor system that aims to address the issue of incongruent deformation between the floor and the resilient steel frame structure. The proposed study introduces a design methodology for the seismic isolation floor system, along with the consideration of its impact on the resilient beam-column nodes. Subsequently, a scaled-down test model is built and constructed, consisting of three stories with a height of 1.2 m and a 2 × 2 span configuration, in accordance with the aforementioned design methodology. The experimental study involved conducting unidirectional shaking table tests on the model in both horizontal directions. The scaled-down model was subjected to seismic excitations of varying intensities, ranging from an 8-degree multiple-occurrence earthquake to a 9-degree rare-occurrence earthquake. Additionally, an extremely rare-occurrence earthquake with an acceleration of 0.75 g was also applied to the model. The test results indicate that the beam-column node exhibits a maximum opening of 4.56 mm and an angle of rotation of 3.04%. Furthermore, the seismic isolation building system demonstrates the ability to accommodate the "expansion effect" of the resilient structure, while simultaneously maintaining load carrying capacity and effectively transmitting horizontal forces. The seismic isolation floor exhibits a notable reduction of 54.8% in its maximum horizontal inertia force, hence demonstrating a favourable damping effect. Based on the observed alterations in the X-direction frequency of the structure prior to and after to the seismic event with a PGA of 0.07 g, it can be inferred that the beam-column connections inside the structure may be deemed as stiff when subjected to several earthquakes. In the PGA = 0.75 g scenario, the maximum interstory displacement angle of 1/69 is observed in the X direction of the 2nd floor. This value is in close proximity to the elastic-plastic interstory displacement angle of 1/50. However, there is no visible deformation or damage to the structure as a whole, and the strain of each member remains within the elastic range, not exceeding 1675 με. Hence, it is widely acknowledged that the resilient steel frame, equipped with a seismic isolation floor system, exhibits robust post-earthquake functional resilience in the face of unidirectional seismic activity.

Inter-story seismic isolation for high-rise buildings

Research on Structural Design of an Isolated High-Rise Building with Enlarged Base and Multiple Tower Layer in High-Intensity Area

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Seismic response analysis of super-high-rise building structures with three-layer isolation systems

Theory and Techniques of Seismic Isolation in High-rise Buildings

Seismic Performance of Multi Story Building with Different Base Isolators

One-way shaking table test study of resilient steel frame with seismic isolated floor system

Multi-objective optimization of the inter-story isolation system used as a structural TMD

Base Isolation for Seismic Retrofitting of a Multiple Building Structure: Design, Construction, and Assessment

Seismic resilient design and negative stiffness-assisted nonlinear isolation system for adjacent non-coaxial buildings linked by corridors

Mid-story isolation design and seismic analysis of Suhao Yinzuo building

Optimal Design of Smart Mid-Story Isolated Control System for a High-Rise Building

A new form of steel base isolation system for seismic high-rise building

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Horizontal Shaking Table Tests on a Four-Story Prototype Structure Using Multi-Dimensional Earthquake Isolation and Mitigation Devices

Does seismic isolation reduce the seismic vulnerability and the variability of the inelastic seismic response? Large-scale experimental investigation

Research on Nonlinear Seismic Response Analysis and Design Method of High-rise Isolated Structure

A diagram‐based design procedure for Intermediate Isolation System in existing buildings with inelastic behavior

Key-problems of Seismic Isolation Structure Design in High-Rise Buildings

Shake table testing and computational investigation of the seismic performance of modularized suspended building systems

Multi-location seismic isolation approach and design for underground structures employing the negative-stiffness amplification system