Abstract:In seismic base isolation, most of the earthquake‐induced displacement demand is concentrated at the isolation level, thereby the base‐isolation system undergoes large displacements. In an attempt to reduce such displacement demand, this paper proposes an enhanced base‐isolation system incorporating the inerter, a 2‐terminal flywheel device whose generated force is proportional to the relative acceleration between its terminals. The inerter acts as an additional, apparent mass that can be even 200 times higher than its physical mass. When the inerter is installed in series with spring and damper elements, a lower‐mass and more effective alternative to the traditional tuned mass damper (TMD) is obtained, ie, the TMD inerter (TMDI), wherein the device inertance plays the role of the TMD mass. By attaching a TMDI to the isolation floor, it is demonstrated that the displacement demand of base‐isolated structures can be significantly reduced. Due to the stochastic nature of earthquake ground motions, optimal parameters of the TMDI are found based on a probabilistic framework. Different optimization procedures are scrutinized. The effectiveness of the optimal TMDI parameters is assessed via time history analyses of base‐isolated multistory buildings under several earthquake excitations; a sensitivity analysis is also performed. The enhanced base‐isolation system equipped with optimal TMDI attains an excellent level of vibration reduction as compared to the conventional base‐isolation scheme, in terms not only of displacement demand of the base‐isolation system but also of response of the isolated superstructure (eg, base shear and interstory drifts); moreover, the proposed vibration control strategy does not imply excessive stroke of the TMDI.

Application of Supplementary Inerter-Based Damping Devices Alongside Unbonded Fiber-Reinforced Elastomeric Isolators

Stochastic Optimization of Electromagnetic Inertial Mass Dampers in Nonlinear Hybrid Base Isolation Systems Under Seismic Excitations

An enhanced base isolation system equipped with optimal tuned mass damper inerter (TMDI)

Multi-Performance Economical Optimization of Base Isolation System with Tuned Inerter Negative Stiffness Damper Subjected to Non-Stationary Seismic Excitation

Performance of a passive rate‐independent damping device in a seismically isolated multistory building

Damping Performance and Optimal Design of Mid-Story Isolation System with Tuned Inerter Damper

Experimental shake table validation of damping behaviour in inerter-based dampers

Seismic Performance of Multi Story Building with Different Base Isolators

Seismic Response Analysis of Composite Isolation Structures with Non-Classical Damping

Editorial: Smart Passive Damper Design for Building Structures with Higher Resilience under Uncertain Earthquake Ground Motions

Optimal application of fluid viscous dampers in tall buildings incorporating integrated damping systems

Inerter-based damping isolation system for vibration control of offshore platforms subjected to ground motions

Seismic response of structures with friction pendulum inerter system (FPIS) under near-fault earthquakes

An Overview of Optimal Damper Placement Methods in Structures

Three-Dimensional Base Isolation Using Vertical Negative Stiffness Devices

Optimum design and performance of a base-isolated structure with tuned mass negative stiffness inerter damper

Definition and Validation of Fast Design Procedures for Seismic Isolation Systems

Seismic demand-oriented design of hybrid base-isolated building with the tuned inerter eddy current damper

Noniterative Optimization Procedure for Seismic Weakening and Damping of Inelastic Structures

OPTIMAL CONTROL OF ACCELERATIONS IN A BASE-ISOLATED BUILDING USING SEMI-ACTIVE MR DAMPERS

Comprehensive Assessment of the Seismic Performance of an Innovative Hybrid Semiactive and Passive State Control System for a Low-Degree-of-Freedom Structure Using Real-Time Hybrid Simulation