Abstract:This study analyzes a high-rise building with B-level height (i.e., a total height of 146.5 m) and a shear wall structure. Since the project contains many plane irregularities (including 1a torsional irregularity, 1b eccentric arrangement, and 2a plane convex irregularity), it should be treated as a super high-rise building. This study introduces the main characteristics and overrun conditions of the project and describes the structural design of the foundation and the basement, upper structural layout, force conditions under frequent, fortified, and rare earthquake actions, and structural performance-based objectives in detail. The following measures can be adopted to address the overrun problem. First, the floor at the thin waist of the structure was thickened to 150 mm and reinforced in the bilayer and bidirectional patterns, with a reinforcement ratio of no less than 0.25%. The damage condition on the floors under a great earthquake was analyzed. The vertical components at the waist were reinforced to constrain the extension of the edge components toward the top. Second, the structure's peripheral stiffness was strengthened to enhance the anti-torsional performance and minimize the adverse effects on torsional irregularities. Third, using two software programs, the performance-based envelope design under medium earthquake action and dynamic elastoplastic analysis under great earthquake action were analyzed to ensure structural safety. Fourth, the edge components were constrained for the shear wall columns with axial-to-compressive stress strength ratios exceeding 0.3. For the overall structure and critical parts, force conditions under frequent, fortified, and rare earthquake conditions were calculated and examined with the SATWE, MIDAS GEN, and SAUSAGE software packages. The calculation results revealed that the structure shows favorable anti-seismic performance, with an overall anti-seismic C-level and a safe and reliable structure. The structural design method introduced in this article can promote the sustainable development of structural design.

Research on the design method of base-isolated structure of Suqian Renfang Zhihui Building

Design of base isolation for a high-rise office building in Suqian

Design of base-isolated structure of Suqian City Gymnasium

Research on Design of Seismic Isolated High-rise Building Structure about One International Residence

Application of hybrid base-isolation technology in a high-rise building

Base Isolation Design of a Brick Masonry Residence Building Supported with Frame-Shear Wall

Design method and its application in hybrid base-isolation of high-rise buildings

Design of reinforced concrete frame-shear wall structure with energy-dissipated braces in Suqian Construction Building

APPLYING BASE ISOLATED TECHNOLOGY TO LOWEST-FRAME MASONRY BUILDING

Research on Nonlinear Seismic Response Analysis and Design Method of High-rise Isolated Structure

Design of RC Frame Structure with Energy-Dissipated Braces in Suqian Education Building

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Energy-dissipation design of Sushang Building in Suqian

Research on Structural Design of an Isolated High-Rise Building with Enlarged Base and Multiple Tower Layer in High-Intensity Area

A Direct Displacement-Based Design Method Based on Chinese Code of Base Isolated Structures

Structural Design and Analysis of a Super-High Building in Nanjing, China

Seismic performance of buildings with novel self‐centering base isolation system for earthquake resilience

Experimental research and numerical simulation of a large-span isolated structure considering multi-dimensional input effects

Mid-story isolation design and seismic analysis of Suhao Yinzuo building

Application Study on Elastic Sliding Bearings in Isolated High-rise Building

Design and Analysis of the Base-isolated Structure