Abstract:Underground structures are vulnerable to strong earthquakes, with their central columns being prone to damage owing to their insufficient resistance capacity. In this study, an effective, hybrid, and multi-location seismic isolation approach was proposed for multi-floor and multi-span underground structures using several negative-stiffness amplification system-based isolation systems (NSAS-ISs). The NSAS-IS originated from the incorporation of an NSAS and an isolation bearing, which was proposed as a flexible connection installed at either the top or bottom of the central columns. The mechanical model as well as physical realization of the NSAS-IS was explored, and an improved damping mechanism was introduced. Subsequently, a multi-location isolation method was proposed with the NSAS-ISs installed at the top or bottom of the columns (corresponding to the 1-end-based isolation method) and at both the top and bottom of the columns (corresponding to the 2-end-based isolation method). The effectiveness and robustness of the proposed NSAS-IS pertaining to the structural seismic response mitigation of typical underground structures under different isolation methods were investigated, focusing on the underground structures buried at different depths subject to various seismic excitations at multiple intensities. The obtained results indicated the effectiveness of both the 1-end- and 2-end-based isolation methods for NSAS-IS in improving the seismic performance of multi-floor and multi-span underground structures, with significant improvement being observed in the damping and isolation effects. In particular, the 2-end isolation method was found to be considerably effective in multi-performance control for multi-intensity excitations and is thus suggested for underground structures with limited space for installation and isolation layers. Consequently, the plastic energy-dissipation burden of the primary structures can be significantly relieved, and the residual deformation of the columns can be avoided owing to their excellent isolation ability.

Application of hybrid base-isolation technology in a high-rise building

Design of base isolation for a high-rise office building in Suqian

Design method and its application in hybrid base-isolation of high-rise buildings

Research on the design method of base-isolated structure of Suqian Renfang Zhihui Building

Research on Design of Seismic Isolated High-rise Building Structure about One International Residence

Research on Structural Design of an Isolated High-Rise Building with Enlarged Base and Multiple Tower Layer in High-Intensity Area

APPLYING BASE ISOLATED TECHNOLOGY TO LOWEST-FRAME MASONRY BUILDING

Theory and Techniques of Seismic Isolation in High-rise Buildings

Application of Seismic Isolation Designing Method Based on China Building Seismic Code

Story isolation design of Suqian SOHO Ginza

Design of base-isolated structure of Suqian City Gymnasium

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

APPLICATION PROSPECT OF BASE-ISOLATION TECHNOLOGY ON FRAMEWORK STRUCTURE FROM EARTHQUAKE DAMAGE OF AN COUNTY'S ADMINISTRATION BUILDING

Research on Nonlinear Seismic Response Analysis and Design Method of High-rise Isolated Structure

Mid-story isolation design and seismic analysis of Suhao Yinzuo building

Shaking Table Tests on the Multi-Dimensional Seismic Response of Long-Span Grid Structure with Base-Isolation

Frame Work on Performance-Based Seismic Design Theory of Base-Isolation Structures

Multi-location seismic isolation approach and design for underground structures employing the negative-stiffness amplification system

A Design Approach for Semi-Active and Smart Base-Isolated Buildings

Seismic performance of advanced three-dimensional base-isolated nuclear structures in complex-layered sites

Base Isolation Design of a Brick Masonry Residence Building Supported with Frame-Shear Wall