Abstract:The R&D Building of Zhanjiang Bay Laboratory is a high-rise structure with multiple irregular items exceeding the specification limit, employing a steel frame-shear wall structural system. The outer frame consists of square steel tube concrete columns and solid-web steel beams, while the core shear wall uses a double steel plate concrete composite shear wall. This paper employs the architectural structural calculation software YJK-EP to perform a dynamic elastic-plastic time-history analysis under rare earthquake action. The shear and bending resistance of the shear wall at the maximum shear force and bending moment are checked to meet the requirements of the "Technical Specifications for Concrete Structures of High-rise Buildings". The maximum inter-story displacement angle meets the requirements of the "Code for Seismic Design of Buildings". The double steel plate concrete composite shear wall Wall-1, connected to a large-span and heavy-load transfer truss, was verified under significant seismic action using the ABAQUS software. The results indicate that Wall-1 can meet the design target requirements under major earthquake conditions. Finally, a dynamic nonlinear analysis method was employed using MIDAS-GEN software to study the structure's anti-progressive collapse performance. The results show that under seven different scenarios, the maximum rotational angle of the remaining structural horizontal members is 2.02°, far less than the limit set by GSA, indicating that a progressive collapse did not occur. In the scenario where the corner column is removed, both the maximum shear and bending moment values for Wall-1 are far below its shear and bending resistance capacities, satisfying the load-bearing requirements. The removal of the corner column has a significant impact on the displacement of the columns on the same level nearby, with the peak displacement change rate reaching 702.65%.

Base Isolation Design of a Brick Masonry Residence Building Supported with Frame-Shear Wall

APPLYING BASE ISOLATED TECHNOLOGY TO LOWEST-FRAME MASONRY BUILDING

Research on the design method of base-isolated structure of Suqian Renfang Zhihui Building

Design of reinforced concrete frame-shear wall structure with energy-dissipated braces in Suqian Construction Building

Design of base isolation for a high-rise office building in Suqian

Isolation Design of a Commerce-Residence Building at Fuyuan Residential Area in Suqian City

Applying Base Isolated Technology to Enforce the Seismic Resistant of Masonry Structure

Design of RC Frame Structure with Energy-Dissipated Braces in Suqian Education Building

Frame Work on Performance-Based Seismic Design Theory of Base-Isolation Structures

Design of base-isolated structure of Suqian City Gymnasium

Theoretical analysis and shaking table tests of old masonry structure reinforced by external frames with added stories on the top using seismic isolation technology

Analysis, Design, and Construction of a Base-Isolated Multiple Building Structure

Application of hybrid base-isolation technology in a high-rise building

Study on the influence of base shear distribution on the seismic response of base-isolated split-foundation structures

Seismic Isolation Layout Optimized of Mid-Rise Reinforced Concrete Building Frame Structure

Design and Analysis of the Base-isolated Structure

Seismic performance of buildings with novel self‐centering base isolation system for earthquake resilience

A Static Nonlinear Analysis of Confined Brickmasonry Walls in a Multistory Building with a Large-Bay

Research on Design of Seismic Isolated High-rise Building Structure about One International Residence

Hybrid geotechnical and structural seismic isolation: Shake table tests

Analysis and Application of Double Steel Plate Concrete Composite Shear Wall in the R&D Building of Zhanjiang Bay Laboratory