Abstract:Summary The energy dissipation capacity of conventional viscoelastic dampers (VEDs) cannot be fully exerted due to the relatively small inter‐story displacement of building structures. Thus, a novel VED with a displacement amplification mechanism based on the lever principle is developed in this study to achieve small displacement but high energy dissipation ability. First, the structural layout of an amplified viscoelastic damper (AVED) system is briefly introduced, and then the displacement amplification effect is described in detail. According to the working principle of the AVED and the relationship of force and geometric displacement in an actual frame structure, the restoring force theoretical formula of the corresponding amplified damper is derived. Based on the restoring force of the AVED and in combination with the secondary development function of the ABAQUS unit, a VUEL subroutine suitable for the explicit algorithm is programmed with the FORTRAN language. Then, the correctness of the subroutine is verified through a comparative analysis of the ABAQUS simulation and theoretically calculated results. Consequently, the vulnerability analysis of a high‐rise steel frame structure is conducted by using the incremental dynamic analysis (IDA) method, and the influence of the AVED on the seismic performance of the steel frame structure is quantitatively analyzed from the perspective of probability statistics. The analysis results show that compared with the VED structure, the failure probability of the AVED‐2 and AVED‐3 structures reaching the ultimate failure state at all levels is reduced by approximately 43% and 57%, respectively, and the collapse margin ratio (CMR) of structures under large earthquakes is increased by approximately 35% and 68%, respectively. This indicates that the AVED structures with displacement‐amplified dampers have a better effect on the seismic stability of tall steel frame structures under random seismic excitations. This study aims to provide comprehensive information for the seismic‐resistant design of tall buildings in earthquake‐prone regions.

Shaking table test and seismic behaviour evaluation of viscous damping wall with amplification mechanism

Timber shear walls: numerical assessment of the equivalent viscous damping

Shake table tests and numerical investigation of a resilient damping device for seismic response control of building structures

Seismic vulnerability analysis of a high‐rise steel frame structure equipped with novel displacement‐amplified viscoelastic dampers

Analysis Research and Application of Viscous Wall Dampers in a Typical Energy Dissipation High-Rise Structure

Seismic performance of building structures based on improved viscous damper seismic design

Design Method of Viscous Dampers in Shaking Table Model Test

Shaking Table Investigations on the Seismic Performance of a Steel Frame with Optimized Passive Energy Dissipation Devices

The Shaking Table Test of Viscoelastic Structure

Analysis and optimization of seismic performance of high-rise residential building

Shaking table tests for structures with viscous dampers considering SSI effect

Seismic Response of a Tuned Viscous Mass Damper (TVMD) Coupled Wall System

Shake Table Test on a Long-Span Cable-Stayed Bridge with Viscous Dampers Considering Wave Passage Effects

Shaking table tests and numerical analysis of RC coupled shear wall structure with hybrid replaceable coupling beams

Shaking table test study of a RC frame with viscous damper

Experimental investigations of building structure with a superelastic shape memory alloy friction damper subject to seismic loads

Research on Application of VDW in Design JinBainian Building with Energy-Dissipated Braces

Suppression of the torsional irregularity of high-rise buildings using viscous wall dampers

Aseismic Analysis of High-Rise Steel Structure Building with Viscous Dampers

Seismic analysis for tall and irregular temple buildings: A case study of strong nonlinear viscoelastic dampers

Seismic Performance of RC Shear Wall Structure with Novel Shape Memory Alloy Dampers in Coupling Beams