Abstract:Suspended building structures have inherent architectural aesthetics and are able to achieve low seismic-induced displacements of the primary structure and accelerations of the suspended segments. A recently proposed subtype of suspended building structures harnesses discrete prefabricated modules to overcome the fragility originating from inter-story drift within the suspended segment and to enhance the overall attenuation. This paper presents the first shake table experimental study of this subtype to directly evaluate its aseismic performance and develop a physics-based modeling strategy that is validated and therefore is reliable. For this purpose, 1:15 scaled shake table experiments of modularized suspended structures were conducted with three fundamental configurations. Each model in each configuration was subjected to at least five ground motions. Results indicate that displacements at the top of the primary structure are reduced by around 50%; in the structure with discrete modules and inter-story dampers, quicker decay was shown, accompanied by lower accelerations of the modules. The inter-story drift ratio of the suspended segment reached 3.75% under 0.12 g PGA excitation, indicating the potential of drift-induced fragility if a regular structure is adopted and proving the benefit of modularization. Numerical models of the tested structural systems have been developed in OpenSees platform. Simulated responses show satisfactory agreement with the measured ones. Subsequent parametric analyses reveal that the performance is sensitive to both the stiffness and damping values especially when the damper is of viscous type. Optimal stiffness facilitates tuning between the primary and secondary structures while optimal damping enhances dissipation notably. Moreover, it is observed that the inherent friction handicaps dissipation instead of facilitating it.

Overview and Analysis of Seismic Resilient Structures with Modular Rocking Shear Walls

Comparing the performance of traditional shear-wall and rocking shear-wall structures designed using the direct-displacement based design approach

Earthquake Response Analysis of Yielding Structures Coupled with Rocking Walls

Seismic behavior of multi-story structural walls under cyclic lateral loading: Experimental study

Assessment of the Seismic Performance and the Base Shear Contribution Ratios of the RC Wall-frame Dual System Considering Soil–Structure Interaction

Seismic performance evaluation of a novel resilient steel frame with self-centering rocking columns and replaceable energy-dissipating connections for low-rise structures

Assessment of the Impact on Steel Walls and Bracing Systems in the Analysis of Seismic Waves during a Building Moment Resistance Frame

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Shear walls optimization in a reinforced concrete framed building for seismic risk reduction

Evaluation of the seismic behavior of reinforced concrete structures with flat slab-column gravity frame and shear walls through nonlinear analysis methods

Seismic design and parametric study of steel modular frames with distributed seismic resistance

Seismic Evaluation and Retrofit of Asymmetric Multi-Story Wood-Frame Building

Seismic Response History Analysis of RC Frame Building with Different Position of Shear Walls by using ETABS

Response analysis of a multi-story building structure with a variety of horizontal irregularities and shear wall geometries

The Performance of Resistance Progressive Collapse Analysis for High-Rise Frame-Shear Structure Based on OpenSees

Shake table testing and computational investigation of the seismic performance of modularized suspended building systems

Review of Using Shear Walls and Bracings for Seismic Strengthening of High-Rise RC Structures

Seismic Performance of Damaged Frame Retrofitted with Self-Centering and Energy-Dissipating Rocking Wall

Seismic demand assessment of self-centering steel plate shear walls

Rocking Motion of a Mid-Rise Steel Plate Shear Wall on Foundation–Soil Medium

Review of Using Shear Walls & Bracings for Seismic Strengthening of High-Rise RC Structures