Abstract:In order to expand the applications of cold-formed thin-walled steel structures, this study proposes a new type of composite wallboard composed of cold-formed thin-walled C-shaped steel and multi-layer concrete, in which C-shaped steel serves as the skeleton, foam concrete acts as the thermal insulation material, and fine aggregate concrete and cement mortar play the part of envelopes. The composite wallboard can be made in a factory assembly line, meeting the requirements of the building (civil and structural) industry. Two steel-frame composite wallboard shear walls were subjected to reciprocating loading, with the connection mode as the design parameter, to investigate the seismic performance of the structure. The failure mode, hysteresis curve, skeleton curve, strength degradation, stiffness degradation, ductility, and energy dissipation capacity of the specimens were analyzed. On this basis, the finite element (FE) model of the steel-frame composite wallboard was established, and the model's accuracy was verified by comparing the bearing capacity and the skeleton curve. Results show that the structure shows shear failure characteristics, and the cement mortar layer and the fine aggregate concrete layer are separated from the C-shaped steel after being crushed. The infilled foam concrete is also crushed, and the welding seams between the extended C-shaped steel and steel frame of the WP-1 specimen are damaged. The hysteresis curves of the two specimens have a clear pinch, but the area enclosed by the hysteresis loop is large, and the energy dissipation capacity is also present. The yield load and ultimate load of the WP-2 specimen are higher than those of the WP-1 specimen, indicating that the higher the connection strength between the composite wallboard and the steel frame, the greater the ultimate carrying capacity of the specimen. The established FE model can accurately estimate the seismic performance of steel-frame composite wallboard shear walls.

Seismic Performance of the Pre-Fabricated Steel Frame Infilled with AAC Wall Panels and Their Joint Connection: Full-Scale Shaking Table Test

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Seismic behavior of steel frame infilled with wall-panels connected by sliding joint

Numerical Analysis Study on Seismic Performance of Semi-Rigid Steel Frame Infilled with Prefabricated Composite Wall Panels

Seismic Performance of a Full-Scale Two-Story Reinforced Concrete Frame with Shale Sintered Wallboards Tested on a Shake Table

Finite element analyses on hysteretic behavior of steel frames infilled with AAC masonry wall with circular-arc openings

Experimental Study on Seismic Performance of Fabricated Steel Foamed Concrete T-Shaped Wallboard

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

On the Seismic Performance of Autoclaved Aerated Concrete Self-Insulation Block Walls

Experimental Study on the Seismic Performance of New Energy Dissipation Connectors in an Autoclaved Aerated Concrete Panel with Assembled Steel Frame

Experimental study on seismic performance of a low-energy consumption composite wall structure of a pre-fabricated lightweight steel frame

An experimental study on the effect of frame-to-wall connection type on the seismic behavior of steel frames infilled with autoclave-cured aerated concrete blocks

Seismic performance of prefabricated wall panels with sliding joints for reinforced concrete frames

Shaking table tests and seismic assessment of a full-scale precast concrete sandwich wall panel structure with bolt connections

Seismic performance of a steel frame assembled with a CFST-bordered composite wall structure

Large-scale shaking table tests of a six-story floor-by-floor assembled CFS frame-framing shear wall structure

Seismic performance evaluation of an infilled rocking wall frame structure through quasi-static cyclic testing

Seismic performance of precast concrete sandwich walls with bolt-steel plate connection

Mechanical performance of prefabricated lightweight steel-foamed ceramsite concrete wall panels: Experimental and theoretical investigations