Abstract:Infilled walls and frames typically employ closely spaced rigid connection, which, under seismic actions, can lead to adverse effects such as amplified seismic responses, overall torsion, and the formation of weak layers in the structure. Flexible connection isolating the infilled walls from the frames can effectively mitigate the adverse effects of rigid connections. In order to reduce the structural mass and seismic impacts, Autoclaved Aerated Concrete (AAC) masonry flexible connection infilled walls have been widely researched. However, most AAC masonry flexible connection infilled walls require complex process operations for AAC blocks, which is not conducive to practical applications in engineering. Therefore, an AAC flexible connection infilled wall with Basalt Fiber Grating (BFG) strips instead of steel bars, with simplified process operations, has been proposed. Existing finite element models for BFG strip-reinforced AAC masonry flexible connection infilled walls employ solid elements, which are difficult to apply to large-scale structural simulations; moreover, existing simplified models for flexible connection infilled walls cannot simulate out-of-plane loading. In this paper, based on homogenization methods, using simplified elements to simulate components, a simplified model for the BFG strip-reinforced AAC masonry flexible connection infilled frame is proposed. Utilizing this model, stress analyses under both in-plane and out-of-plane loading are conducted and compared with corresponding experimental results. The results indicate that the in-plane simplified model (ISM) fits well with the experimental results in terms of hysteresis curves, with similar relationships between stiffness degradation and strength attenuation. The displacement force curve of the out-of-plane simplified model (OSM) before reaching the peak load is in good agreement with the experimental results. The maximum plastic range of OSM is 5% smaller than the test results, and it can be considered that the plastic ranges of the two are comparable, manifesting the models' capability to adequately manifest arching behavior. The simplified model enables simulation of out-of-plane loading and provides a new approach for modeling large-scale frame structures with flexible connection infilled wall.

Finite element analyses on hysteretic behavior of steel frames infilled with AAC masonry wall with circular-arc openings

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

Seismic behavior of high strength concrete composite walls with embedded steel truss

Seismic Performance of Reinforced Concrete Squat Walls with Embedded Cold-Formed and Thin Walled Steel Truss

Experimental Study of RC Frames with Window and Door Openings Under Cyclic Loading

Seismic Performance of the Pre-Fabricated Steel Frame Infilled with AAC Wall Panels and Their Joint Connection: Full-Scale Shaking Table Test

On the Seismic Performance of Autoclaved Aerated Concrete Self-Insulation Block Walls

Nonlinear FEM Analysis on RC Structural Wall with Large Eccentric Openings

Numerical Analysis Study on Seismic Performance of Semi-Rigid Steel Frame Infilled with Prefabricated Composite Wall Panels

Study on in-plane/out-of-plane seismic performance of masonry-infilled RC frame with openings and a new type of flexible connection

Experiments and Numerical Simulations on the Seismic Performance of Steel-Frame Composite Wallboard Shear Walls

Simplified Model Study of Autoclaved Aerated Concrete Masonry Flexible Connection Infilled Frames with Basalt Fiber Grating Strips

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Seismic behaviour of masonry infilled hinged steel frames with openings: experimental and numerical studies

Finite Element Study on the Shear Capacity of Traditional Joints between Walls Made of AAC Masonry Units

Nonlinear FEM analysis of autoclaved aerated concrete block composite masonry walls

Finite Element Modeling and Analysis of Reinforced Concrete Frame Structure with Infilled Walls

Seismic Behaviour Of Concrete-Filled Steel Tubular Frame To Rc Shearing Wall High-Rise Mixed Structures

Experimental and analytical studies of infill wall with sliding joints considering a door opening

An experimental study on the effect of frame-to-wall connection type on the seismic behavior of steel frames infilled with autoclave-cured aerated concrete blocks