Abstract:High refractive index organic/inorganic hybrid films have attracted considerable attention in both fundamental and applied research as hard coatings for organic resins.Among these hybrid materials,TiO_2 is a typical candidate for hybrid components due to its high refractive index and hardness.In this article,a series of titania containing organic/inorganic hybrid films with high refractive index and performance were prepared by co-hydrolysis of silane coupling agent (3-glycidyloxypropyl) trimethoxysilane (KH-560) and titanium butoxide [Ti(OBu)_4] through sol-gel method without using any stabilizer.Our method improved the optical and mechanical properties of the resultant hybrid coatings.The microstructure,optical,mechanical and thermal properties of the hybrid films were characterized by using different methods. FTIR indicates that the different components have been successfully combined to hybrids by covalent bonds.TGA indicates these hybrid films have good thermal durability.AFM and TEM indicate that the films have smooth surface, and the titania nano-phases (3 nm) were well dispersed in all the films without aggregations even in the film with high titania content.UV-Vis transmission spectra indicate that the hybrid films have high transparency of above 90% in the range of visible light,which is in accordance with AFM and TEM results.In addition,the refractive index of the hybrid films could be adjusted linearly from 1.5 to 1.7 by altering the titania content.The pencil hardness of the films is 4～5 H both before and after aging, and all the films have good adhesion performance to substrate materials.The hybrid films have potential applications in filters,optical waveguide,lenses and antireflection films.

PREPARATION OF OPTIC FILM WITH HIGH REFRACTIVE INDEX BY CHEMICAL METHODS

Preparation of ZrO_2/SiO_2 Multilayer Films Via Chemical Methods

Preparation of Zirconia Thin Films Via Sol-Gel Process from Inorganic Precursor

Sol-gel Processing of ZrO2 and Polymer Doped-Zro2 Monolayer Reflective Films with High Laser Damage Threshold

Preparation of Sol–gel ZrO2–SiO2 Highly Reflective Multilayer Films and Laser-Induced Damage Threshold Characteristic

Preparation of Sol-Gel ZrO2 Films with High Laser-Induced Damage Threshold under High Temperature

Preparation of high refractive index TiO_2 thin film via sol-gel process

Modification and Laser-Damage Resistance of Zirconia Thin Films

Fabrication of Sol–gel Derived ZrO 2 Thin Film for HR Coatings Via Rapid Thermal Annealing Process

Sol-Gel Processing of Zirconia Coating for HR Mirrors with High Laser Damage Threshold

Sol–gel Derived ZrO2–SiO2 Highly Reflective Coatings

The preparation of silica-based SiO2-ZrO2 films as waveguides by sol-gel process

Enhanced antireflective and laser damage resistance of refractive-index gradient SiO2 nanostructured films at 1064 nm

Surface-reliefed Gratings Film with High Laser Damage Thresholds

Mechanical and Optical Properties of Ion-exchange Strengthened Glass Coated with Sol-Gel Derived ZrO2-SiO2 Film

Synthesize Uniform ZrO2 NPs by Non-Coordination Solvents and Modification for High Refractive Film

Zro2-Sio2 Coatings For Wavelength-Selective Reflection Filter

Improvement on Laser-Induced Damage Threshold of Sol-Gel ZrO_2 Coatings by Crystal Structure Tuning

Preparation of Zirconia/Organosilicone Thin Film by Sol-Gel Method

Preparation and characterization of ZrO2–SiO2 binary films for planar optical waveguides

STUDIES ON PREPARATION AND PROPERTIES OF ORGANIC/INORGANIC HYBRID TRANSPARENT FILMS WITH HIGH REFRACTIVE INDEX