Abstract:A series of ZrO2 and polymer doped-ZrO2 sols have been synthesized by the controlled hydrolysis of zirconium n-propoxide. Acetic acid was used as the chelating agent. Poly(ethylene glycol)(PEG) 200 and polyvinylpyrrolidone(PVP) were introduced to produce the hybrid sols. ZrO2 and the polymer doped-ZrO2 optical thin films were then prepared by spin-coating the stable sols on K9 glass substrates. Effects of various synthetic parameters were studied, on the sol stability, the microstructure of colloidal system, the structural and optical properties of the films, as well as the laser damage resistance. In our reaction systems, both hydrolysis and chelation coexist. The preference for any of the two reactions strongly depends on the system composition and ultimately determines the stability and microstructure of the colloidal system. Besides, the addition of a proper amount of PEG200 and PVP, which probably acts as the competitive ligands, particle surface protective polymers and structure directive agents, can modify the hydrolysis-condensation process, thus producing more stable, uniform sols with mass fractal structure (fm=2.33—2.46) and average particle diameter of 19.1—23.7nm. Benefiting from the precursor sol structure, the polymer doped-films exhibit excellent surface planarity and uniform inner structure, which endows the films with good optical property and excellent laser damage resistance. For instance, the hybrid film with 10% PEG200 and 15% PVP (mass fractions) showed a high laser damage threshold of 24.5J/cm2 (for 1ns pulse duration) and a reflectivity increase of about 2% than that of the substrate at wavelength of about 1000nm.

Improvement on Laser-Induced Damage Threshold of Sol-Gel ZrO_2 Coatings by Crystal Structure Tuning

Effect of crystal structure on optical properties of sol-gel derived zirconia thin films

Preparation of Sol-Gel ZrO2 Films with High Laser-Induced Damage Threshold under High Temperature

Fabrication of Sol–gel Derived ZrO 2 Thin Film for HR Coatings Via Rapid Thermal Annealing Process

Modification and Laser-Damage Resistance of Zirconia Thin Films

Characteristics of laser-densified and conventionally heat treated sol–gel derived silica–titania films

Increased Laser-Damage Resistance of Sol–Gel Silica Coating by Structure Modification

CO2 Laser-Induced Structure Changes on a Zircon Refractory

Sol-Gel Processing of Zirconia Coating for HR Mirrors with High Laser Damage Threshold

Sol-gel Processing of ZrO2 and Polymer Doped-Zro2 Monolayer Reflective Films with High Laser Damage Threshold

Influence of Zirconia Sol-Gel Coating on Fracture Strength of Chemical Strengthened Soda Lime Glass

A New Route For Sol-Gel High Refractive Index Zro2 Coating

In-situ High Temperature Laser-Induced Damage of Sol-Gel Ta2O5 Films with Different Dual Additives

Laser-Induced Damage Threshold of Tio2 Films with Different Preparation Methods and Annealing Temperatures

Experimental research of laser-induced damage of the monolayer ZrO2 PVD and sol–gel films

Study of Al2O3/MgF2 HR Coatings at 355Nm

Preparation of Zirconia Thin Films Via Sol-Gel Process from Inorganic Precursor

Laser-Induced Damage on Ordered and Amorphous Sol-Gel Silica Coatings

Effects Of Rapid Thermal Annealing On The Structural, Electrical, And Optical Properties Of Zr-Doped Zno Thin Films Grown By Atomic Layer Deposition

Effect of Laser Conditioning on Surface Modification and Laser Damage Resistance of SiO2 Antireflection Film

Microstructural Characteristics of Al2O3-based Refractory Containing ZrO2 Induced by CO2 Laser Melting