Abstract:In this paper, a stub-loaded transmission line that is used to design Wilkinson power dividers with arbitrary power division ratios is discussed in depth. Power division is always required in most wireless/wireline communications such as industrial systems and consumer electronics. However, the design of an unequal Wilkinson power divider, particularly with a large division ratio, becomes a challenge in engineering because of the impractical realization of the high- or low-impedance transmission lines on a dielectric substrate. In this paper, we first introduce a transmission-line structure and perform theoretical analysis. The derivations reveal that the studied structure can be utilized to design Wilkinson power dividers with equal or unequal power divisions. For demonstration purposes, two power dividers with division ratios of 1 : 1 and 1 : 9, respectively, and operating in the popular industrial, scientific, and radio-frequency identification frequency bands are implemented by loading distributed transmission-line elements, namely, open- or short-circuited stubs. The demonstrators are also fabricated and validated by measurements, and good agreement between the experimental results and the simulated responses is observed.

A Continuously Tunable Wilkinson Power Divider with a Flat Division Ratio

Novel Design of Wilkinson Power Dividers with Arbitrary Power Division Ratios

A new design of compact microstrip Wilkinson power dividers

Novel Wilkinson Power Divider with Uniform Impedance Line

A New Dual-Band Wilkinson Power Divider

A tri-band Wilkinson power divider using extended T-shaped stubs

A dual-band Wilkinson power divider with 6:1 power dividing ratio using coupled lines

Analysis and design of a novel coupled-line wideband Wilkinson power divider

Design of A Compact Wilkinson Power Divider with High Order Harmonics Suppression

A 10:1 Unequal Wilkinson Power Divider Using Coupled Lines with Two Shorts

A Dual-Band Unequal Wilkinson Power Divider Using Asymmetric Coupled-Line

Wideband Filtering Power Divider with Deep and Wide Stopband

Design of Wilkinson Power Divider with Filtering Response and Controllable Transmission Zeros.

A New Quad-Band Wilkinson Power Divider

Dual-band equal/unequal Wilkinson power dividers based on coupled-line section with short-circuited stub

Shunt-stub Wilkinson Power Divider for Unequal Distribution Ratio

A Power Divider with Tunable Power

Stub-Loaded Wilkinson Power Divider with Performance Enhancement.

Ultra-Wideband Power Divider with a Controllable Notched Band

A Fully Differential Ultra-Compact and High Isolation Transformer-Based Wilkinson Power Divider

A Design Approach for Dual-Band Wilkinson Power Divider with Two Pairs of Coupled-Line Sections