Abstract:This paper presents a novel wideband filtering power divider. Instead of the T-junction in the traditional power divider design, a three coupled-line structure is utilized to provide the equal power division to every outputs. Together with the quarter-wavelength coupled line in each way, a wideband filtering response can be obtained. In order to enhance the frequency selectivity, a pair of half-wavelength open stubs are loaded between the three-line coupled structure and parallel coupled lines to produce a pair of transmission zeros on both sides of the passband. To enhance the upper stopband rejection, two additional open stubs are installed at output ports. A new three-port equivalent network for the three-line coupled structure is proposed, and the circuit model for the filtering power divider can be developed for illustrating the working mechanism and the design process. Furthermore, the generalized Chebyshev function is applied to synthesize and analyze the whole structure systematically. For demonstration, a prototype of the wideband filtering power divider operating at 3 GHz is designed and fabricated. The measured results show a 16-dB bandwidth of 62%, an isolation better than 16.5 dB, and a 29-dB wide stopband from 4.39 to 7.73 GHz (1.1f(0)).

Wideband Filtering Power Divider with Deep and Wide Stopband

A Wideband Power Divider with Bandpass Response

Design of a Wideband Filtering Power Divider with Good In‐band and Out‐of‐band Isolations

Quasi-elliptic Bandpass Filtering Power Divider with Ultra-Wide Stopband

Wide-Stopband Bandpass-Filtering Power Divider With High-Frequency Selectivity

Design of Wideband Filtering Power Dividers with Harmonic Suppression Based on the Parallel-Coupled Line Structures

A Novel Wideband Filtering Power Divider With Embedding Three-Line Coupled Structures.

High-performance filtering power divider with multiple transmission zeros

Wideband Four-Way Filtering Power Divider with Isolation Performance Using Three Parallel-Coupled Lines

Filtering Power Divider with Wide Stopband Using Open-Stub Loaded Coupled-Line and Hybrid Microstrip T-Stub/DGS Cell

Design of Filtering Power Divider with High Frequency Selectivity

Design of a Wideband Filtering Power Divider with Stub-Loaded Ring Resonator

Dual-Band Filtering Power Divider Using Dual-Resonance Resonators with Ultrawide Stopband and Good Isolation

Reconfigurable Dual-Band Filtering Power Divider with Ultra-Wide Stopband Using Hybrid Microstrip/Square Defected Ground Structure

Design of Compact Wideband Filtering Power Divider with Extended Isolation and Rejection Bandwidth

Design of an Ultra-Wideband Power Divider with Good In-Band Performance and Sharp Roll-Off Skirt

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

Compact Ultra-Wideband Bandpass-Response Power Divider with High-Frequency Selectivity

Exact synthesis of couple‐line based wideband four‐way filtering power divider with unequal power division

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Novel Wideband Microstrip Filtering Power Divider Using Multiple Resistors for Port Isolation