Abstract:In this paper, a three-way reconfigurable power divider/combiner is proposed based on novel switch element with matching network (SEMN) and reconfigurable impedance transformer network (RITN). A good matching performance and a high isolation of the SEMN with one p-i-n diode can be obtained by the parasitic inductance and reverse capacitance of the p-i-n diode involved in matching circuits. With different parameters of one p-i-n diode under forward bias and reverse bias, the reconfigurable impedance matching can be obtained by the RITN with a simple structure. By using four RITNs and nine SEMNs, the three-way reconfigurable power divider/combiner can provide seven different states in the three-path mode, the two-path mode, and the single-path mode. For verification, a 5-GHz three-way reconfigurable power divider/combiner is designed and fabricated. In the three-path mode, measured insertion losses from port 1 to transmission ports (port 2, port 3, and port 4) are less than 0.74 dB and the isolations between transmission ports are higher than 32.1 dB. In the two-path mode with three states, the measured insertion losses are less than 0.93 dB; the isolations between transmission ports, transmission ports and isolation ports, and port 1 and isolation ports are higher than 27.5, 35.1, and 30.5 dB, respectively. In the single-path mode with three states, the measured insertion losses are less than 1.13 dB; the measured isolations between transmission ports and isolation ports are higher than 28.8 dB, and the isolations between port 1 and isolation ports are higher than 28.2 dB at the design frequency.

A Power Divider with Tunable Power

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

1 V 10 GHz CMOS frequency divider with low power consumption

A Continuously Tunable Wilkinson Power Divider with a Flat Division Ratio

A New Compact Power Divider Based on Capacitor Central Loaded Coupled Microstrip Line

A Novel Reconfigurable Three-Way Power Divider Constructed on Unitary Plane

Proposal and Design of a Power Divider with Wideband Power Division and Port-to-Port Isolation: A New Topology

Novel Dual-Band Out-of-Phase Power Divider with High Power-Handling Capability

Compact Reconfigurable Power Divider with Low Insertion Loss

A new design of compact microstrip Wilkinson power dividers

Compact Microstrip Power Divider with Both Sides Capacitor Loading

Compact microstrip power dividers with slow wave structure and capacitor loading

Reconfigurable Unequal Power Divider with a High Dividing Ratio

Quasi-planar High-Isolation Four-Way Power Divider Based on Capacitance Compensation Technology

A Balanced-to-Balanced Power Divider with Arbitrary Power Division

Compact Four-Way Radial-Cavity-Based Power Divider/Combiner with High Power and High Isolation

A Dual-Band Unequal Power Divider with Flexible Choice of Implementation

A Three-Way Reconfigurable Power Divider/Combiner

Planar Four-Way Power Divider with Stopband Rejection and Good Output Isolation

Frequency Reconfigurable Filtering Power Divider with a Single Varactor

Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped resonators modified by lumped elements