Abstract:In this paper, modified π-shaped resonator composed of both microstrip transmission lines and lumped elements are employed to design a Wilkinson power divider. Utilizing these resonators leads to designing a compact divider featuring a selectable operating frequency with optional power division ratio and very wide-range harmonic suppression. To vary the operating frequency and the power division ratio, the values of just the utilized lumped elements are changed without manipulating the dimensions of microstrip lines. As a design sample, a miniaturized divider capable of operating at four frequencies i.e., 0.5, 1.0, 1.5 and 2 GHz with optional equal or unequal power division and harmonic suppression ability at each of these frequencies is designed and simulated. Finally, as a feasible sample, another Wilkinson power divider which can optionally operate at 700 MHz with equal power division or 1.2 GHz with unequal power division is designed and implemented. Based on the measurement results, the spurious harmonics from 2nd to 25th in the 700 MHz-divider and 2nd to 15th in the 1.2 GHz-divider are suppressed. Moreover, almost 96% and 93% size reduction at 700 MHz and 1.2 GHz, respectively, are achieved. The S21 and S31of the unequal divider are − 8.8 and − 3.73 dB, which indicate an unequal 3.2:1 power division.

Compact Microstrip Power Divider with Both Sides Capacitor Loading

A Compact Dual-Mode Microstrip Filter Using Hexagonal Resonator and Capacitive Loading Technique

A Compact Gysel Power Divider with Unequal Power-Dividing Ratio Using One Resistor

A Design of V-band Reconfigurable SPDT Switch/Power Divider Based on Slotted SIW

A Miniaturized Dual‐mode Zeroth‐order Ring Bandpass Filter with One Left‐handed Unit and a Capacitive Stub

Dual-band Wilkinson Power Divider Based on SS-CML

A Compact and Reconfigurable C-Band DGS-based power divider using RF MEMS Capacitive switch

Compact Design of Dual-Band Power Divider with Coupled-Line Shunt Elements

Compact Dual-Band Balanced-to-Unbalanced Filtering Power Divider Design With Extended \textCommon-Mode Suppression Bandwidth

Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped resonators modified by lumped elements

Closed-Form Design of Wilkinson Power Divider with Broadband Harmonic Suppression and Size Reduction

Uwb Power Divider With One Narrow Notch-Band And Wide Stop-Band

Compact Ultra-Wideband Wilkinson Power Divider in Parallel Stripline with Modified Isolation Branches

Compact Reconfigurable Power Divider with Low Insertion Loss

Design of Compact UWB Power Divider with One Narrow Notch-Band

A Novel Compact, Wideband Four-Way Wilkinson Power Divider with an Improved Isolation Topology

Novel Planar Compact Coupled-Line Singleended-To-Balanced Power Divider

Novel design of compact quad‐band divider using stepped impedance coupled lines

Compact Multi-Band Power Dividers Based on Stub Loaded Stepped-Impedance Resonators with Defected Microstrip Structure (Sl-Sir-dms)

Extremely Compact Ultra-Wideband Power Divider Using Hybrid Slotline/microstrip-Line Transition

Compact Dual-Band Filtering-Response Power Divider with High In-Band Frequency Selectivity