Abstract:Nowadays, ultrasonic cavitation has been successfully used for the degradation of organic pollutants. However, many sonotrodes employed for wastewater treatment are excited to present a longitudinal vibration mode. Thus, the strongest cavitation generally occurs at the tip end of the sonotrodes or the inner walls of ultrasound baths, resulting in severe erosion of the vibrating metal surface caused by ultrasonic cavitation, even though the sonotrodes are made of titanium alloy. In addition, recontamination is possible due to corrosion of the sonotrode. To avoid the above issues, a novel ultrasound system composed of a cylindrical sonotrode and a Langevin-type transducer, is proposed for generating cavitation only in the concentric zone of the cylindrical sonotrode. The first-order longitudinal vibration and the radial vibration are simultaneously stimulated in the Langevin trans-ducer and the cylindrical sonotrode, respectively, to produce the focused cavitation at the concentric zone of the sonotrode. At first, the finite element simulation is conducted to confirm the planned vibration of the ultrasound system and to compute its sound pressure. Subsequently, the prototype of the proposed ultrasound system is manufactured and assembled for vibration measurements. Finally, experimental investigations are carried out on the ultrasound system prototype. By the aluminum foil experiments, the cavitation bubbles occurred in the center of the cylindrical sonotrode. The erosion area increased with the increase of the working power and processing time. After treating the methyl violet solution by ultrasonic cavitation for 60 min, the methyl violet in the so-lution is reduced by 60%, which certainly will help the development of an appropriate flow system for dye degradation.

Experimental Research on Antiscale, Scale Removal and Enhancement of Heat Transfer of Ultrasound

Experimental Investigation of Spray Cooling Performance in Non‐boiling Zone on Rough Superhydrophilic/hydrophobic Surfaces

Experiment on the antiscale and descaling and heat transfer enhancement of acoustic cavitation sewage heat exchanger

Influence study on blast furnace cooling water quality by ultrasonication treatment

Experimental Study on Heat Transfer Enhancement of Water-water Shell-and-Tube Heat Exchanger Assisted by Power Ultrasonic

Simulation and Experimental Investigation of an Ultrasound System with Cavitation in Concentric Zone

Experimental study on heat transfer and resistance of round tube with tube sheet under ultrasonic action

Improvement of ultrasonic heat transfer enhancement using acoustical focusing and resonance properties

Progress of Cavitation and Acoustic Streaming Dynamics of Liquid Materials Within Ultrasonic Field

The Design and Experimental Research of High-Power and High-Frequency Electromagnetic Anti-Scaling System

Calcium carbonate scaling control on heat plate exchange surfaces using ultrasound

Experimental Study of the Ultrasonic Effect on Heat Transfer Inside A Horizontal Mini-Tube in the Laminar Region

Experimental study of the effects of ultrasound on the heat transfer enhancement in a 3D-printed minichannel heat sink

Experimental study of heat transfer performance in rectangular microchannels enhanced by ultrasound

Ultrasound-assisted enhancement of heat transfer in immersed coil heat exchangers: Effects of acoustic intensity and ambient fluid properties

Saturated Boiling Heat Transfer under Ultrasound

Experimental Research on Anti-fouling of Heat Exchanger

Experimental Study on the Effect of Additives on the Heat Transfer Performance of Spray Cold Plate

Heat transfer enhancement using 2MHz ultrasound

Experimental Study on the Combined Effect of Electromagnetic and Electrochemical Processes on Descaling and Anticorrosion

Application of Simulation Method of the Ultrasonic Field in High-Power Low-Frequency Ultrasonic Engineering