Abstract:The enhancement of heat transfer of water flow over a flat plate under 20 kHz ultrasound irradiated from a submerged horn-type transducer was investigated experimentally in a water tunnel. To examine the ultrasonic effects, the transducer emitted waves perpendicular to the mainstream direction, and the freestream velocity varied between 0.12 and 0.17 m/s. The transducer position was fixed at 0.45 m from the plate leading edge in a streamwise direction. This position was altered in a heightwise direction as dimensionless heightwise distances ( Z ) that were divided by the diameter of the horn-tip transducer (12 mm) at 1.5, 3.0, and 4.5 from the plate surface. A hot film sensor and thermochromic liquid crystals coated on the test surface were used to demonstrate the hydrodynamic and thermal characteristics, respectively. The maximum temperature reduction of 3.5 °C was observed in the case of Z = 1.5. By employing a horn-type transducer, the acoustic jet and cavitation phenomena played a key role in destabilizing the thermal and velocity boundary layers, which resulted in a decrease in surface temperature. The incident wave shape was triangular, with an enlarging lateral zone along the flow stream. When the waves were released at Z = 1.5, the local Nusselt number was increased up to 2.55 compared to without waves. Under ultrasonic effects, the near-wall flow velocity was detected to be decreasing upstream prior to the incident zone while increasing in the incident region. When waves existed, the highest turbulent intensity was up to 29 times more intense than it was in the absence of waves. Furthermore, a predictive formula for the Nusselt number with ultrasound was established depending on the local Reynolds number and the distance between the ultrasonic source and test surface.

Experimental investigation of ultrasonic effect on natural and forced heat transfer in heat sinks

Local Heat Transfer Enhancement Induced by a Piezoelectric Fan in a Channel with Axial Flow

Experimental study of the effects of ultrasound on the heat transfer enhancement in a 3D-printed minichannel heat sink

Experimental study on inlet turbulent flow under ultrasonic vibration: Pressure drop and heat transfer enhancement

Experimental investigation of forced convection heat transfer for different models of PPFHS heatsinks with different fin-pin spacing

Heat transfer enhancement of water flow over a heating flat plate using 20 kHz ultrasonic waves irradiated from submerged horn-type transducer

The parametric optimization of a pin-fin heatsink in the presence of ultrasonic vibration based on the second law of thermodynamic

Numerical and experimental study of inverse natural convection heat transfer for heat sink in a cavity with phase change material

Louvered Fin-and-Flat Tube Compact Heat Exchanger under Ultrasonic Excitation

Enhancing Heat Transfer Of Air-Cooled Heat Sinks Using Piezoelectrically-Driven Agitators And Synthetic Jets

Enhancing thermal performance in enclosures filled with nanofluids subjected to sinusoidal heating: a numerical study

Experimental investigation of flow boiling heat transfer enhancement under ultrasound fields in a minichannel heat sink

Active Heat Sink with Piezoelectric Translational Agitators, Piezoelectric Synthetic Jets, and Micro Pin Fin Arrays

Experimental study on heat transfer and resistance of round tube with tube sheet under ultrasonic action

Heat transfer enhancement using 2MHz ultrasound

Experimental and numerical investigation of thermal-hydraulic performance of bi-metallic (Al-Cu) plate fin heat sink

Experimental study of heat transfer performance in rectangular microchannels enhanced by ultrasound

Numerical Investigation of Heat Transfer Enhancement in a Slot Channel Induced by a Piezoelectric Fan.

Experimental Investigation into the Effect of Fin Shapes on Heat Dissipation Performance of Phase Change Heat Sink

Experimental investigation of the simultaneous effect of using phase change material/plate-fin heat sink on thermal performance of a power supply unit

Thermal Effect of PMUT and Its Application to the Heat Dissipation of Power Electronics.