Experimental Research on Anti-fouling of Heat Exchanger

Pei-qing DUAN,Sui-fei NAN,Mei DOU,Hui-fen XU,Xue-gang MAO

DOI: https://doi.org/10.3321/j.issn:1003-9015.2009.01.010

2009-01-01

Abstract:The fouling behavior of mixed salts in DMF (N,N-dimethylformamide) solution during cooling in heat exchanger was investigated. The methods of inserting screw spring in the cooling tube, putting solid particles in the cooling tube to form liquid-solid fluidization and the combination of these two measures were adopted respectively to prevent and clean up the fouling scale on the tube wall on-line. The variation of the heat transfer resistance of fouling scale with cooling time was obtained by total heat transfer coefficient method, and the total amount of mixed salts crystallization fouling was measured by weighting method. The effects of fluid velocity, temperature difference of cooling, structure parameters of inserted spring, number and size of solid particles putted in the tube on the fouling scale formation were studied. The results show that, in the fluid velocity range of 0.6～1.0 m·s-1, the inserted spring has the best anti-fouling effect when the ratios of its diameter and screw-pitch to the tube inside diameter are 0.8 and 1.5, respectively; And for the liquid-solid fluidization method, the scale forming rate and the weight of fouling scale formed in certain time decrease with the increase of the particle number and particle size. For the combination method of combining the inserting spring and adding solid particle to form liquid-sold fluidization method, the weight of fouling scale formed in certain time can be decreased by 20%～50% of that formed by using the liquid-solid fluidization method alone under the same experimental condition. The results could be used as reference and guide for the actual industry process.