Study on the mechanism of ultrasonic cavitation effect on the surface properties enhancement of TC17 titanium alloy
Shida Chuai,Xijing Zhu,Linzheng Ye,Yao Liu,Zexiao Wang,Fei Li
DOI: https://doi.org/10.1016/j.ultsonch.2024.106957
Abstract:In industrial production and scientific research, ultrasonic cavitation technology, with its outstanding physical and chemical processing capabilities, has been widely applied in fields such as material surface modification, chemical synthesis, and biotechnology, becoming a focal point of research and application. This article delves into the effects of different ultrasonic frequencies on cavitation outcomes through the combined use of numerical simulation, fluorescence analysis, and high-speed photography, specifically analyzing the quantitative improvement in the mechanical properties of TC17 titanium alloy under ultrasonic cavitation at frequencies of 20 kHz, 30 kHz, and 40 kHz. The study found that at an ultrasonic frequency of 20 kHz, the maximum expansion radius of cavitation bubbles can reach 51.4 μm, 8.6 times their initial radius. Correspondingly, fluorescence intensity and peak area also increased to 402.8 and 28104, significantly above the baseline level. Moreover, after modification by ultrasonic cavitation, the original machining marks on the surface of TC17 titanium alloy became fainter, with the emergence of new, uniformly distributed microfeatures. The microhardness of the material increased from 373.7 Hv to 383.84 Hv, 396.62 Hv, and 414.06 Hv, with a maximum improvement of 10.8 %. At the same time, surface height difference and roughness significantly decreased (to 3.168 μm and 0.61 μm respectively), with reductions reaching 45.1 % and 42.4 %, indicating a significant improvement in material surface quality. Notably, there is a negative correlation between the improvement of mechanical properties and ultrasonic frequency, suggesting that the improvement effects decrease as ultrasonic frequency increases. This research not only reveals the quantitative relationship between ultrasonic cavitation frequency and material surface modification effects but also provides a solid scientific basis and practical guidance for the application of ultrasonic cavitation technology in surface engineering, signifying the technology's potential for broad application in the future.