Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

&Lt;title>fabrication of High-Reflectivity Fiber Bragg Gratings by Excimer Laser Irradiated Phase Masks</title>

High Fluence Krf Excimer Laser Fabricated Bragg Grating in A Microfiber

Large Refractive Index Modulation Based on a BDK-doped Step-Index PMMA Optical Fiber for Highly Reflective Bragg Grating Inscription.

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

A Methode of Estimating the Reflectivity and Refractive-Index Modulation of Double-Cladding Large Core Fiber Bragg Grating

UV laser fabrication and modification of fiber Bragg gratings by stitching sub-gratings with in situ fluorescence monitoring

Refractive Index Sensing Based on Higher-Order Mode Reflection of A Microfiber Bragg Grating

Nanoscale morphology and thermal properties of low insertion loss fiber Bragg gratings produced using the phase mask technique and a single femtosecond laser pulse

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Recovery of a Highly Reflective Bragg Grating in DPDS-doped Polymer Optical Fiber by Thermal Annealing.

Fabrication of $\bf LiNbO_{3}$ Phase Gratings by Excimer Laser Ablation through a Silica Phase Mask

Experimental Study of Fiber Bragg Grating for different Period by using Phase Mask Technique.

LASER DIRECT WRITING OF LONG PERIOD FIBER GRATING BY 800 NM FEMTOSECOND LASER PULSES

A Fully-Encircled Polymerized Microfiber Bragg Grating by 3D Femtosecond Laser Nanofabrication

High Reflectivity, Ultraflat-Spectrum Chirped Fiber Bragg Grating Written Using Low Energy UV Femtosecond Pulses

Ytterbium fiber laser based on first-order fiber Bragg gratings written with 400nm femtosecond pulses and a phase-mask

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

Novel Method for Fabricating Adjustable Apodized and Chirped Gratings by UV Light Scanning Writting Technology

Fabrication of Large Grating by Monitoring the Latent Fringe Pattern

Nanohole Induced Microfiber Bragg Gratings.

Grating Inscription Into Fluoride Fibers: A Review

&Lt;title&gt;fabrication of High-Reflectivity Fiber Bragg Gratings by Excimer Laser Irradiated Phase Masks&lt;/title&gt;