Abstract:We report for the first time successful inscription of high reflectivity Bragg grating in nanostructured core active fiber. Nanostructurization of the fiber core allows to separate the active and photosensitive areas and to distribute them all over the core. As a result unfavorable clustering between germanium and ytterbium particles is avoided. The distribution of discrete glass areas with feature size smaller than λ/5 results in effectively continuous refractive index profile of the fiber core. We present a single-mode fiber with built-in Bragg grating for laser application with the core composed of ytterbium and germanium doped silica rods. The core structure is arranged as a regular lattice of 1320 doped with ytterbium and 439 doped with germanium silica glass rods. The average germanium doping level within the core of only 1.1% mol allowed efficient inscription of Bragg grating. The nanostructured core was 8.6 m and the internal cladding was 112 m in diameter coated with low index polymer to achieve the double-clad structure. In the first proof-of-concept in the laser setup we achieved 35 % of slope efficiency in relation to launched power for the fiber length of 18 m. The output was single-mode with spectrum width below 1 nm. The maximum output power limited by pumping diode was 2.3 W. The nanostructurization opens new opportunities for development of fibers with a core composed of two or more types of glasses. It allows to control simultaneously the refractive index distribution, the active dopants distribution and photosensitivity distribution in the fiber core.

Ytterbium fiber laser based on first-order fiber Bragg gratings written with 400nm femtosecond pulses and a phase-mask

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

Ytterbium Fiber Laser Based on Fiber Bragg Grating Inscribed Point-by-point with Femtosecond Laser

Femtosecond Laser Inscription of FBGs in Ytterbium-Doped Fiber Based on Fluorescence Detection Techniques

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Ytterbium-doped nanostructured core silica fiber with built-in Bragg grating for laser applications

Femtosecond written fiber Bragg gratings in ytterbium-doped fibers for fiber lasers in the kilowatt regime

Double-clad Tm3+-doped Silica Fiber Laser with Bragg Grating Inscribed Directly into Active Core by Femtosecond Laser

Yb3+-Doped Double-Clad Fiber Laser Based on Fiber Bragg Grating

Yb 3+ -Doped Double-Clad Fibre Laser Based on Fibre Bragg Grating

Single-frequency DBR lasing by integrating FBGs into germanium-free photosensitive highly Yb3+-doped silica fibers

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

Femtosecond Laser Inscription of Bragg Gratings in Tm3+-doped Fluorotellurite Glass Fibers for Lasing at 2.3 Μm

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Fabrication of Integrated Single Frequency DBR Fiber Laser Directly on YDF by Femtosecond Laser

Narrow linewidth Ytterbium-doped double-clad fiber laser using fiber grating as wavelength selective component

Ultralong Π-Phase Shift Fiber Bragg Grating Empowered Single-Longitudinal Mode DFB Phosphate Fiber Laser with Low-Threshold and High-Efficiency

Yb 3+ -Doped Double-Clad Fiber Laser with All Fiber Cavity

High-efficiency continuous-wave Tm-doped fiber laser with a single fiber Bragg grating at 1942 nm

The Large Core Diameter Fiber Bragg Grating Written by Femtosecond Laser

Short-Cavity Er/Yb-P/Al/Si Co-doped Fibre Grating Laser