Abstract:We demonstrate highly efficient Raman distributed feedback (DFB) fibre lasers for the first time with up to 1.6 W of continuous wave (CW) output power. The DFB Bragg gratings are written directly into two types of commercially available passive germano-silica fibres. Two lasers of 30 cm length are pumped with up to 15 W of CW power at 1068 nm. The threshold power is ~2 W for a Raman-DFB (R-DFB) laser written in standard low-NA fibre, and only ~1 W for a laser written in a high-NA fibre, both of which oscillate in a narrow linewidth of <0.01 nm at ~1117 nm and ~1109 nm, respectively. The slope efficiencies are ~74% and ~93% with respect to absorbed pump power in the low-NA fibre and high-NA fibre respectively. Such high conversion efficiency suggests that very little energy is lost in the form of heat through inefficient energy transfer. Our results are supported by numerical simulations, and furthermore open up for the possibility of having narrow linewidth all-fibre laser sources in wavelength bands not traditionally covered by rare-earth doped silica fibres. Simulations also imply that this technology has the potential to produce even shorter R-DFB laser devices at the centimetre-level and with mW-level thresholds, if Bragg gratings formed in fibre materials with higher intrinsic Raman gain coefficient than silica are used. These materials include for example tellurite or chalcogenide glasses. Using glasses like these would also open up the possibility of having narrow linewidth fibre sources with DFB laser oscillating much further into the IR than what currently is possible with rare-earth doped silica glasses.

Ytterbium-doped nanostructured core silica fiber with built-in Bragg grating for laser applications

Ytterbium fiber laser based on first-order fiber Bragg gratings written with 400nm femtosecond pulses and a phase-mask

Femtosecond Laser Modification of Silica Optical Waveguides for Potential Bragg Gratings Sensing

Femtosecond written fiber Bragg gratings in ytterbium-doped fibers for fiber lasers in the kilowatt regime

Femtosecond inscription of large-area fiber Bragg gratings for high-power cladding pump reflection

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Fused silica optical fibers with graded index nanostructured core

Writing Bragg Gratings in Multicore Fibers

High-Efficiency Radiation-Balanced Yb-Doped Silica Fiber Laser With 200-mW Output

Single-frequency DBR lasing by integrating FBGs into germanium-free photosensitive highly Yb3+-doped silica fibers

Point-by-point fiber Bragg grating inscription in free-standing step-index and photonic crystal fibers using near-IR femtosecond laser

Femtosecond Laser Inscription of Bragg Gratings in Tm3+-doped Fluorotellurite Glass Fibers for Lasing at 2.3 Μm

Ytterbium-Phosphate Glass for Microstructured Fiber Laser

Spectroscopic and Laser Properties of Al-P Co-Doped Yb Silica Fiber Core-Glass Rod and Large Mode Area Fiber Prepared by Sol-Gel Method

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Highly efficient Raman distributed feedback fibre lasers

Microstrutured Fibers with Germanium Doped Core Components

Yb 3+ -Doped 200 Μm Diameter Core, Gain Guided Index-Antiguided Fiber

Random Laser Based on Ytterbium-Doped Fiber with a Bragg Grating Array as the Source of Continuous-Wave 976 nm Wavelength Radiation