Abstract:We report for the first time successful inscription of high reflectivity Bragg grating in nanostructured core active fiber. Nanostructurization of the fiber core allows to separate the active and photosensitive areas and to distribute them all over the core. As a result unfavorable clustering between germanium and ytterbium particles is avoided. The distribution of discrete glass areas with feature size smaller than λ/5 results in effectively continuous refractive index profile of the fiber core. We present a single-mode fiber with built-in Bragg grating for laser application with the core composed of ytterbium and germanium doped silica rods. The core structure is arranged as a regular lattice of 1320 doped with ytterbium and 439 doped with germanium silica glass rods. The average germanium doping level within the core of only 1.1% mol allowed efficient inscription of Bragg grating. The nanostructured core was 8.6 m and the internal cladding was 112 m in diameter coated with low index polymer to achieve the double-clad structure. In the first proof-of-concept in the laser setup we achieved 35 % of slope efficiency in relation to launched power for the fiber length of 18 m. The output was single-mode with spectrum width below 1 nm. The maximum output power limited by pumping diode was 2.3 W. The nanostructurization opens new opportunities for development of fibers with a core composed of two or more types of glasses. It allows to control simultaneously the refractive index distribution, the active dopants distribution and photosensitivity distribution in the fiber core.

Femtosecond written fiber Bragg gratings in ytterbium-doped fibers for fiber lasers in the kilowatt regime

Femtosecond inscription of large-area fiber Bragg gratings for high-power cladding pump reflection

Ytterbium fiber laser based on first-order fiber Bragg gratings written with 400nm femtosecond pulses and a phase-mask

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

Ytterbium-doped nanostructured core silica fiber with built-in Bragg grating for laser applications

Femtosecond pulse written fiber gratings: a new avenue to integrated fiber technology

Femtosecond laser fabrication of large-core fiber Bragg gratings for high-power fiber oscillators

High-temperature-resistant distributed Bragg reflector fiber laser written in Er/Yb co-doped fiber

Point-by-point fiber Bragg grating inscription in free-standing step-index and photonic crystal fibers using near-IR femtosecond laser

Femtosecond Laser Inscription of Bragg Gratings in Tm3+-doped Fluorotellurite Glass Fibers for Lasing at 2.3 Μm

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

Double-clad Tm3+-doped Silica Fiber Laser with Bragg Grating Inscribed Directly into Active Core by Femtosecond Laser

Femtosecond-written long-period gratings in fluoride fibers

Ytterbium-doped large-core fiber laser with 1.36 kW continuous-wave output power.

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

High-efficiency sub-watt in-band-pumped single-frequency DBR Tm3+-doped germanate fiber laser at 1950 nm

Efficient long period fiber gratings inscribed with femtosecond pulses and an amplitude mask

Fiber Bragg Gratings in the Visible Spectral Range With Ultraviolet Femtosecond Laser Inscription

High-energy femtosecond Yb-doped fiber laser operating in the anomalous dispersion regime

A 100 mW monolithic Yb waveguide laser fabricated using the femtosecond laser direct-write technique