Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Beam-shaping device-free femtosecond laser plane-by-plane inscription of high-quality FBGs

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Femtosecond Laser Direct Written Fiber Bragg Gratings with Narrow Bandwidth and High Sideband Suppression

Femtosecond laser line-by-line inscription of apodized fiber Bragg gratings

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

Low Short-Wavelength Loss Fiber Bragg Gratings Inscribed in a Small-Core Fiber by Femtosecond Laser Point-by-point Technology.

Point-by-Point Femtosecond-Laser Inscription of 2- Μ M-Wavelength-band FBG Through Fiber Coating

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Direct Femtosecond Laser Inscription Of An Ir Fluorotellurite Fiber Bragg Grating

The Large Core Diameter Fiber Bragg Grating Written by Femtosecond Laser

Femtosecond Laser Inscription of FBGs in Ytterbium-Doped Fiber Based on Fluorescence Detection Techniques

Femtosecond laser inscribed fiber Bragg gratings based on precise spatial apodization

Femtosecond laser plane-by-plane inscription of Bragg gratings in sapphire fiber

Slit Beam Shaping for Femtosecond Laser Point-by- Point Inscription of High-Quality Fiber Bragg Gratings

Parallel-Integrated Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

High-quality fiber Bragg grating inscribed in ZBLAN fiber using femtosecond laser point-by-point technology.

Fiber bragg gratings fabricated by femtosecond laser micromachining methods

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

800-Nm Femtosecond-Laser-written Core-and-cladding Integrated Fibre Bragg Grating Inscribed by Line-by-line Method Through Fibre Coating