Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

All-fiber laser pump reflector based on a fs-written VBG

Femtosecond inscription of large-area fiber Bragg gratings for high-power cladding pump reflection

Influence of Bragg Reflection of Chirped Tilted Fiber Bragg Grating on Raman Suppression in High-Power Tandem Pumping Fiber Amplifiers.

A Methode of Estimating the Reflectivity and Refractive-Index Modulation of Double-Cladding Large Core Fiber Bragg Grating

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

High Reflectivity, Ultraflat-Spectrum Chirped Fiber Bragg Grating Written Using Low Energy UV Femtosecond Pulses

Ytterbium fiber laser based on first-order fiber Bragg gratings written with 400nm femtosecond pulses and a phase-mask

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Experimental demonstration of enhancing pump absorption rate in cladding-pumped ytterbium-doped fiber lasers using pump-coupling long-period fiber gratings

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Double-clad Tm3+-doped Silica Fiber Laser with Bragg Grating Inscribed Directly into Active Core by Femtosecond Laser

Ultra-short Wavelength Operation in Thulium-doped Silica Fiber Laser with Bidirectional Pumping

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

Highly efficient Raman distributed feedback fibre lasers

Direct femtosecond laser writing fiber Bragg gratings in double-D cladding chalcogenide glass infrared fibers

3 W Narrow-Linewidth Ultra-Short Wavelength Operation Near 1707 Nm in Thulium-Doped Silica Fiber Laser with Bidirectional Pumping

Ytterbium-doped nanostructured core silica fiber with built-in Bragg grating for laser applications

Chirped and Phase-Sampled Fiber Bragg Grating for Tunable DBR Fiber Laser.

Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point technique

High efficiency all-fiber cylindrical vector beam laser using a long-period fiber grating.

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser