Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

Direct femtosecond laser writing fiber Bragg gratings in double-D cladding chalcogenide glass infrared fibers

Mid-infrared microfiber Bragg gratings

Chalcogenide Glass Microfibers for Mid-Infrared Optics

Fabrication of Fresnel zone plate in chalcogenide glass and fiber end with femtosecond laser direct writing

Direct infrared femtosecond laser inscription of chirped fiber Bragg gratings

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Femtosecond laser direct writing large-area fiber Bragg grating based on diaphragm shaping

Monolithic Chalcogenide Glass Waveguide Integrated Interband Cascaded Laser

Femtosecond Laser Inscribed Chirped Fiber Bragg Gratings.

Femtosecond Laser Modification of Silica Optical Waveguides for Potential Bragg Gratings Sensing

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

High-precision fiber Bragg gratings inscription by infrared femtosecond laser direct-writing method assisted with image recognition

Femtosecond laser writing of infrared microlens arrays on chalcogenide glass

Review of Femtosecond-Laser-Inscribed Fiber Bragg Gratings: Fabrication Technologies and Sensing Applications

Femtosecond Laser Inscribed Small-Period Long-Period Fiber Gratings With Dual-Parameter Sensing

First-order fiber Bragg grating inscription in indium fluoride fiber using a UV/Vis femtosecond laser and two-beam interferometry

LASER DIRECT WRITING OF LONG PERIOD FIBER GRATING BY 800 NM FEMTOSECOND LASER PULSES

In-Fiber Grating Fabricated by Femtosecond Laser Direct Writing for Strain Sensing

Femtosecond Laser Inscription of Bragg Gratings in Tm3+-doped Fluorotellurite Glass Fibers for Lasing at 2.3 Μm