Abstract:Fiber Bragg Gratings (FBG) have great significance in the development of high-power fiber laser systems. Fabrication sources, fibers, and fabrication technology would affect the performance of FBGs directly. In this research, a scanning exposure method for fabricating FBGs in different types of photosensitive fibers with a 213nm solid-state laser source was proposed. The Q-switched Nd: YVO4 laser fifth harmonic source was compared with the traditional excimer lasers and the impacts of lengths, center wavelengths, titled angles, and apodization on the reflection and transmission spectra of FBGs were discussed. The scanning fabrication system, which can realize the tilting of phase mask and the adjustment and monitoring of tension, was built according to the characteristics that the output spot diameter of the fabrication source was sub-millimeter. While the high quality of fabrication was guaranteed, FBGs with lengths of 3mm~20mm, center wavelengths shift of 0nm~4.2nm, and tilted angles of 0~21 were obtained, and all the parameters were simultaneously adjusted and controlled, the deepest transmission loss of about -70dB. FBGs fabricated were of good stability and repeatability, especially in hydrogen fibers whose stability was independent of high-temperature annealing (1500C) which was different from the fabrication results of excimer laser sources. Then the unconformity between experimental results and theoretical simulation was discussed and the optimization schemes were proposed. The experimental results and analysis provided a better experimental scheme for UV laser fabricating FBGs and the experimental basis for further optimizing the fabrication technology and further analyzing the microscopic mechanism of optical fiber photosensitivity.

A Methode of Estimating the Reflectivity and Refractive-Index Modulation of Double-Cladding Large Core Fiber Bragg Grating

Compact Microfiber Bragg Gratings with High-Index Contrast

Modeling and analysis of localized biosensing and index sensing by introducing effective phase shift in microfiber Bragg grating (μFBG)

Optimized femtosecond laser direct-written fiber Bragg gratings with high reflectivity and low loss

Weak reflectivity measurements of large-mode-area FBGs by a scale composed of a fiber Fabry-Perot interferometer

Refractive Index Sensing Based on Higher-Order Mode Reflection of A Microfiber Bragg Grating

Femtosecond inscription of large-area fiber Bragg gratings for high-power cladding pump reflection

Fiber Bragg Grating with Enhanced Cladding Modes Inscribed by Femtosecond Laser and a Phase Mask

Fabrication of fiber Bragg gratings with precisely adjustable and controllable parameters based on 213nm solid-state laser

All-fiber laser pump reflector based on a fs-written VBG

Silt-Beam Shaping Method for Femtosecond Laser Point-by-Point Inscription of Highly Localized Fiber Bragg Gratings with Enhanced Cladding Modes

Fiber-end antireflection method for ultra-weak fiber Bragg grating sensing systems

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

Ytterbium-doped nanostructured core silica fiber with built-in Bragg grating for laser applications

Ytterbium fiber laser based on first-order fiber Bragg gratings written with 400nm femtosecond pulses and a phase-mask

Femtosecond Laser Modification of Silica Optical Waveguides for Potential Bragg Gratings Sensing

High-Quality Fiber Bragg Gratings Inscribed by Femtosecond Laser Point-by-Point Technology

Characterization of refractive index change and fabrication of long period gratings in pure silica fiber by femtosecond laser radiation

Direct Bragg Grating Inscription in Single Mode Step-Index TOPAS/ZEONEX Polymer Optical Fiber Using 520 nm Femtosecond Pulses

Refractive index sensor in eccentric fiber Bragg gratings using a point-by-point IR femtosecond laser