Abstract:<p>Wavelength-switchable fiber laser systems have many potential applications. Herein, the use of an erbium-doped fiber laser based on parallel fiber Bragg gratings (FBGs) (ASE: amplified spontaneous emission; BRM: broadband reflection mirror; CCD: charged-coupled device; EDFL: erbium-doped fiber laser; FBG: fiber Bragg gratings; IR: infrared; MZI: Mach–Zehnder interferometer; OSA: optical spectrum analyzer; OC: output coupler; PC: polarization controller; SNR: signal-to-noise ratios; 3D: three-dimensional; wavelength division multiplexing (WDM)) is proposed to achieve C + L band triple-wavelength-switchable laser output at approximately 1.5 μm. In the proposed system configuration, three parallel FBGs with different resonant wavelengths were fabricated using an 800 nm femtosecond pulsed laser. The proposed fiber laser incorporates first-order FBGs with the periods of 538, 542, and 547 nm. The femtosecond laser was propagated through polyimide coating and cladding and was focused onto the fiber core by a 63× oil lens, while FBGs were inscribed with the use of a point-by-point method to generate resonant wavelengths at 1555.3, 1569.2, and 1583.1 nm. When the FBGs were used as wavelength selectors, a lasing threshold of 85 mW was obtained, and switchable lasing with stable single- and dual-wavelength outputs was achieved based on the adjustment of a polarization controller. Concerning the switchable single-wavelength lasing, the signal-to-noise ratio was greater than 37.23 dB, and the 3 dB linewidth was less than 0.09 nm. The respective power fluctuation measurements were less than 0.22 and 0.68 dB for the single- and dual-wavelength lasers at 26 °C over a scan time of 30 min.</p>

Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point technique

Dual-Wavelength Er-Doped Fiber Laser Based on Phase Sampled Fiber Bragg Grating

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

1.5 μm polarization-maintaining dual-wavelength single-frequency distributed Bragg reflection fiber laser with 28 GHz stable frequency difference

Fiber Bragg gratings fabricated by femtosecond lasers for narrow-linewidth fiber laser

Erbium fiber laser based on intracore femtosecond-written fiber Bragg grating

Distributed Bragg Reflector Laser Based on Composite Fiber Heavily Doped with Erbium Ions

Multi-Wavelength DFB Laser Based on Sidewall Third Order Four Phase-Shifted Sampled Bragg Grating with Uniform Wavelength Spacing

Wavelength-switchable erbium-doped fiber laser incorporating fiber Bragg grating array fabricated by infrared femtosecond laser inscription

Femtosecond Laser-Written Small-Period Long-Period Fiber Grating for an L-Band Normal Dispersion Mode-Locked Fiber Laser

Highly efficient Raman distributed feedback fibre lasers

High power GaSb-based distributed feedback laser with laterally coupled dielectric gratings at 1.95μm

Short monolithic dual-wavelength single-longitudinal-mode DBR phosphate fiber laser

Femtosecond-pulse inscription of fiber Bragg gratings with single or multiple phase-shifts in the structure

Random Raman fiber laser based on a twin-core fiber with FBGs inscribed by femtosecond radiation

A Compact Low Noise Single Frequency Linearly Polarized DBR Fiber Laser at 1550 nm

Dual-wavelength DFB Fiber Laser Based on a Chirped Structure and the Equivalent Phase Shift Method

Highly Efficient Distributed Feedback Brillouin Fiber Laser

A novel distributed feedback fiber laser based on equivalent phase shift

Double-clad erbium/ytterbium-doped fiber laser with a fiber Bragg grating