Abstract:We demonstrate highly efficient Raman distributed feedback (DFB) fibre lasers for the first time with up to 1.6 W of continuous wave (CW) output power. The DFB Bragg gratings are written directly into two types of commercially available passive germano-silica fibres. Two lasers of 30 cm length are pumped with up to 15 W of CW power at 1068 nm. The threshold power is ~2 W for a Raman-DFB (R-DFB) laser written in standard low-NA fibre, and only ~1 W for a laser written in a high-NA fibre, both of which oscillate in a narrow linewidth of <0.01 nm at ~1117 nm and ~1109 nm, respectively. The slope efficiencies are ~74% and ~93% with respect to absorbed pump power in the low-NA fibre and high-NA fibre respectively. Such high conversion efficiency suggests that very little energy is lost in the form of heat through inefficient energy transfer. Our results are supported by numerical simulations, and furthermore open up for the possibility of having narrow linewidth all-fibre laser sources in wavelength bands not traditionally covered by rare-earth doped silica fibres. Simulations also imply that this technology has the potential to produce even shorter R-DFB laser devices at the centimetre-level and with mW-level thresholds, if Bragg gratings formed in fibre materials with higher intrinsic Raman gain coefficient than silica are used. These materials include for example tellurite or chalcogenide glasses. Using glasses like these would also open up the possibility of having narrow linewidth fibre sources with DFB laser oscillating much further into the IR than what currently is possible with rare-earth doped silica glasses.

Highly Efficient Distributed Feedback Brillouin Fiber Laser

Distributed Feedback Fiber Laser Employing Brillouin Gain

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

High-Efficiency Hybrid Brillouin/Ytterbium Fiber Laser

High Efficiency Frequency Doubling with a Passive Enhancement Cavity

Novel high-speed low-chirp q-modulated semiconductor distributed feedback laser

A novel-configuration multi-wavelength Brillouin erbium fiber laser and its application in switchable high-frequency microwave generation

Brillouin Laser Based on High <i>Q</i> Fiber Ring Resonator

Kilohertz-Linewidth Brillouin Photonic Crystal Fiber Laser With Non-Resonance Pumping Configuration

High signal-to-noise ratio, single-frequency 2 μm Brillouin fiber laser.

Tunable and narrow linewidth multi-wavelength Brillouin-erbium fiber laser using dual-wavelength pumping

Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point technique

Purely Gain-Coupled Distributed Feedback Bragg Semiconductor Laser Emitting at 795 Nm with a Wide Tunable Range

Tunable Self-Seeded Multiwavelength Brillouin-Erbium Fiber Laser with Enhanced Power Efficiency.

18.4 GHz evenly spaced flat multi-wavelength Brillouin–Raman comb fiber laser in the U-band region

Multiwavelength self-seeded Brillouin-erbium fiber laser with 45-nm tunable range

Stabilizing Brillouin fiber laser for applications in distributed BOTDA sensing

1.5 μm polarization-maintaining dual-wavelength single-frequency distributed Bragg reflection fiber laser with 28 GHz stable frequency difference

Sub-kHz high-order mode Brillouin random fiber laser based on long-period fiber grating and distributed Rayleigh scattering in a half-open linear cavity

Multi-wavelength Brillouin-erbium Fiber Laser with More Than 95 Lines Based on a Dual-Ring Structure

Highly efficient Raman distributed feedback fibre lasers