Abstract:The distributed feedback laser (DFB) is a typical laser diode where the active region of the device is periodically structured as a diffraction grating. The output of a DFB laser has one single longitudinal mode and a relatively narrow line-width, usually several megahertz or one order less. However, applications such as coherent optical communication and accurate fiber sensing demand an even narrower line-width. An effective method for compressing a DFB laser is demonstrated. The line-width of a DFB laser, 200 KHz detected originally, is suppressed to sub kilohertz by adding an external parallel feedback cavity. The DFB laser is normatively designed but without the output isolator. The parallel feedback cavity is constructed by inserting several pieces of multimode fiber into a standard linear single-mode fiber cavity. In multimode fiber, each transverse mode has a different propagation constant. Equivalently, when a light beam propagates from single mode fiber to multimode fiber, it will split into a few parallel light paths with different propagation constants. The external cavity and DFB cavity form a compound resonant cavity for light beams. Lasing light in the compound cavity must fit the restrictions of all light paths, thus line-width of the final output is suppressed. When a passive external cavity is used, the line-width is suppressed to 1.25 KHz, detected by a delayed self-heterodyne interferometer with a 100km fiber delay line. By adding an erbium doped fiber amplifier (EDFA) into the external cavity for loss compensation, the result is updated to 430 Hz. This line-width suppressing method can be applied for other types of fiber lasers in a similar way. The parallel feedback mechanism is also suggested for general laser cavity designing to achieve ultra narrow line-width light source.

A novel distributed feedback fiber laser based on equivalent phase shift

Two-wavelength fiber laser based on two equivalent phase shifts

Narrow Linewidth Distributed Feedback Lasers Utilizing Distributed Phase Shift

Distributed feedback fiber laser based on a fiber Bragg grating inscribed using the femtosecond point-by-point technique

Experiment of Distributed Feedback Dye Laser

Phase-matched Combined Distributed-Feedback/fabry-pérot Structure for Semiconductor Lasers

Numerical Analyzation of Distributed Feedback Lasers with Different Phase Shift Structures

Study of Cascaded Tunable DFB Semiconductor Laser with Wide Tuning Range and High Single Mode Yield Based on Equivalent Phase Shift Technique

Dual-Wavelength Er-Doped Fiber Laser Based on Phase Sampled Fiber Bragg Grating

Dual-Wavelength DFB Fiber Laser Based on Unequalized Phase Shifts

Dual-wavelength DFB Fiber Laser Based on a Chirped Structure and the Equivalent Phase Shift Method

Experimental demonstration of eight-wavelength distributed feedback semiconductor laser array using equivalent phase shift.

Two-Frequency Brillouin Fiber Laser Based on Bragg Grating Fabry-Perot Cavity

Experimental Demonstration of the Three Phase Shifted Dfb Semiconductor Laser Based on Reconstruction-Equivalent-Chirp Technique

Equivalent Phase Shift in a Fiber Bragg Grating Achieved by Changing the Sampling Period

Simple frequency-tunable optoelectronic oscillator using integrated multi-section distributed feedback semiconductor laser

Performance Enhancement of Distributed Feedback Laser with a Partial Grating

1.3 Μm Laterally-Coupled Distributed Feedback Laser with a Triangular Prism Etched Facet

Single Longitudinal Mode Parity-Time Symmetric Brillouin Fiber Laser Based on Lithium Niobate Phase Modulator Sagnac Loop

Linear polarization and narrow-linewidth external-cavity semiconductor laser based on birefringent Bragg grating optical feedback

Line-Width Compression Of The Distributed Feedback Laser With An External Parallel Feedback Cavity